when your car revs up and doesn't go anywhere
NO FREE PLAY AT TOP POSITION - CLUTCH SLIPS AND VEHICLE DOES NOT MOVE TOO MUCH FREE PLAY AT BOTTOM - VEHICLE WON'T SHIFT CLUTCH DOES NOT RELEASE
They sometimes leak hydraulic fluid down on to the carpet where the peddles are.
first check your clutch slave cylinder for leaks, if its leaking ,replace and bleed system,if its not leaking,bleed system ,dont forget to bleed clutch damperand if its still not right, then replace clutch master cylinder.
Whenever you are having a problem with the clutch disengaging the engine from the transmission it is advisable to bleed the clutch slave cylinder. If the clutch can't be operated by bleeding the slave cylinder then the clutch master cylinder is gone and should be replaced.
The clutch cable has proabably broken.
Slipping, chattering, or grabbing.
We need more info here. How do you tell if the clutch has "WHAT" in a Pontiac Sunfire?
be gone thot
You can tell by how much higher the clutch pedal is to the brake pedal. when new pedals are at the same height.
slave cylinder has gone bad or you are out of hydrolic fluid
start it and try to put it in gear without using the clutch if it goes the clutch is shot
No. In fact, having a clutch is not the norm for most forklifts in current productions, as manual transmissions for them have mostly gone out of vogue.