How can you use the headphone jack on the surround sound AV Receiver and still get audio from the main speakers at the same time?
Connect the digital audio output of the TV to a surround sound receiver and speakers. Read More
Need to connect Sony Bravia klv32ex400 which has no clear audio-out port to 5.1 channel surround without HDMI so where do you connect the 5 cables from the surround sound system to the HDTV?
The KLV32ex400 has no surround output capability. The only audio output is a stereo 1/8" headphone jack. If you are using a Blu-Ray or HD cable or satellite receiver, you can run an optical or coaxial digital cable from those directly to the receiver for surround sound. Read More
Will you get 5.1 audio if you connect a sony DVD player to a 46 inch plasma tv with an HDMI cable and or coaxial cable?
No, you will need a surround sound receiver or amplifier with 5 speakers and a subwoofer to hear surround sound. Read More
You need a receiver or processor that routes the tv tuner thru to those speakers, unless, you have that built into your tv. Connect the audio-out input from the tv to the 'tv in' or 'aux' or 'vcr', etc. Then, connect those speakers to the appropriate jacks on the receiver....good luck!..BB Read More
Your case has front panel audio and mic but doesn't cut audio from main speakers when you insert headphone jack in front panel?
The audio signal to the speakers are not cut off since the connection to the front panel and speakers are in parallel. Read More
How do i connect my tv which is a Digital Audio Out connection to my computer speakers which have a 3.5mm Headphone Jack connection so that my TVs sound will play out of the speakers?
Unless your computer speakers have a digital audio input, you won't be able to just use a cable. If your TV has two RCA line outputs (audio outputs), you can get an adapter cable to run to your computer speakers. You could upgrade your speakers to models that have a digital input, but most of those are higher-end surround-type systems. Read More
Connect the audio out of the TV to the audio input of the surround receiver with a dual RCA cable. Note that this connection isn't surround. You will need to connect a DVD, Blu-Ray or digital cable box to the surround receiver for true surround sound. Read More
If you use a surround sound receiver that let you define the numbers of channels, set it for 2.0 or 2.1 if you have a sub. The center channel audio will be mixed into the left and right speakers. Read More
And AV receiver receives audio and video signals from various sources (DVD, TV, CD etc.), sends the video to a monitor and powers speakers to play the sound. An A/V received will have multiple audio and video inputs, speaker connections, and may have electronics that allow for the playback of surround sound format audio. Read More
3D sound is a type of surround sound That is produced by two speakers. Read More
Buy a headphone jack to have a red and white splitter. You can connect the headphone jack to your computer and the audio splitter to the aux. jack on your amplifier. The amplifier needs to be set on the aux setting. You can buy the headphone audio splitter @ Walmart for about 6 dollars. Read More
Connect the digital audio out of the TV to the digital input of the surround sound system. If you are using a cable or satellite receiver for your programming, connect the audio output of them to the input of the surround system. Read More
You could use an external cable or satellite receiver and connect speakers to that. Read More
Many televisions do not have headphone jacks anymore. Almost every TV that has a headphone jack will shut off its internal speakers when the headphones are connected. You should look at wireless headphones that will connect to the audio output of the television instead of the headphone jack if you need to use both at the same time. Read More
Connect the digital audio output from the TV to the digital input of the surround sound receiver. Read More
The KLV32ex400 has no surround output capability. The only audio output is a stereo 1/8" headphone jack. If you are using a Blu-Ray or HD cable or satellite receiver, you can run an optical or coaxial digital cable from those directly to the receiver for surround sound. Read more: http://wiki.answers.com/Q/Need_to_connect_Sony_Bravia_klv32ex400_which_has_no_clear_audio-out_port_to_5.1_channel_surround_without_hdmi_so_where_do_you_connect_the_5_cables_from_the_surround_sound_system_to_the_HDTV#ixzz1J9KDofrK Read More
It is used to switch audio and video signals into a television set, monitor, etc. It also contains a radio receiver and a audio power amp to drive the speakers. Read More
An optical audio cable is used to transmit digital audio (AC-3) signal from the source to the receiver, such as from a DVD player to a digital audio amplifier/receiver. You can transmit 5.1 dolby digital or DTS surround sound with an optical audio cable, same as digital coaxial audio cable. Read More
You will need a digital audio switchbox or a surround sound receiver with 2 digital inputs. Read More
26 inch vizeo tv that does not have outputs what do you need to buy so you can get surround sound for watching regular tv and playing xbox and watching DVD and stuff?
Surround sound system in a box is the cheapest option. Although the best one is going to be to buy separate speakers and connect them to a high quality A/V receiver. If you will be watching HD programming on anything then make sure you get one with HDMI ports. And for the best audio using optical audio cables are the way to go along with HDMI for video. Although for optical and HDMI you probably… Read More
How do you fix your sound when you plug a head phone but then when you take it out it doesnt work wWhy?
Because the connector from your headphones is not in the socket, therefore the audio current cannot travel to your headphone speakers, and the headphone will not emit any noise. Read More
It depends on what kinda setup you have and what you are going for. If you have enough inputs on your receiver, you can have all your components connected to that then have the output of your receiver go to your TV. You would always have surround sound with this setup. If you only want surround sound at certain times then you can have everything ran to your TV and then have the audio out… Read More
If your audio and video are not in sync, you should check your surround receiver to see if it has a audio sync or lip sync function. Read More
If your TV has RCA audio outputs, you can connect an amplifier to these outputs to plug in speakers. If it has a headphone jack, you can connect computer-type amplified speakers to this output. Read More
Usually this is a sync problem when viewing the screen with sound through a surround receiver. See if your receiver has a lip sync feature to compensate for the delayed audio. Read More
Auxiliary inputs to a receiver are always stereo. If you have a 5-channel analog signal (from a computer or other multi-channel device), you will need a receiver with a 5.1 analog input. This has 5 separate RCA inputs for left, right, center, sub, and the two surround speakers. An analog output from a VHS-Hi Fi VCR can be input into the stereo aux inputs of a receiver and decoded to Dolby Surround, but this format… Read More
the ps2 and xbox 360 use optical outputs. The 360 requires a special a/v cable for digital audio. your surround receiver should have a digital audio input that takes an optical cable. Read More
A receiver is one component. It is composed of a power amplifier, radio tuner (usually), surround sound decoders, and audio and video switchers (and possibly scalers). Read More
If you are using the TV's own tuner, connect the digital audio output of the TV to the digital input of the surround receiver. If you are using an external (cable or sattelite) tuner, connect an HDMI cable from the tuner to the receiver, and then connect the HDMI output from the receiver to the TV. Read More
That would be the idea of a "surround sound system". Unless you are talking about hooking up more than one speaker to the same exact port on the receiver. If so than yes, but you will not get true surround sound. For instance: You hook up two speakers to the same port, lets pick the front left channel, and then place one to the front left of the TV and the other to the back… Read More
What is wrong if your DVD player will play background music but not the actors' voices and can you find repair instructions on the Internet?
It's could be because the DVD player is set to play 5.1 surround but you do not have a surround system. Go to your DVD's audio setting and change it from 5.1 to normal stereo. The problem is most likely in your surround receiver. As most DVD player's don't have surround output anymore, your receiver is where you set your speaker configuration. If you don't have a center channel speaker (the one above or below… Read More
7 surround speakers, 3 subwoofers But most likely that is a snippet from some table of content Read More
If you are using a Blu-Ray player and your blu-ray and surround receiver both have coaxial digital audio connectors, you can use those to connect the two, bypassing the TV for the audio. Read More
If your TV has a digital audio output, connect it to the optical or coaxial digital input of the surround receiver. This will pass through the digital audio signal sent from a HDMI input at the TV. Read More
You will need RCA audio cables in order to connect your TV to your hi fi speakers. Connect the cables to the cables to the audio out on your television. Connect the other end to the axillary input port on your receiver. Read More
There is a 1/4" headphone port located at the back of the PSR-295; plug your headphones into that and the audio is transferred to the headphone instead of the speakers. If your headphones use a 1/8" plug, you'll need an adapter. Read More
Home theater systems involve surround sound. Audio CDs are recorded in stereo, not surround. Most surround receivers have digital effects processors that can simulate environments such as concert halls and clubs, which can give the illusion that the listener is at a concert for the music playing. Any CD player connected to a surround receiver, along with front and rear speakers, and usually a subwoofer and center channel speaker, will create a home theater system… Read More
If your receiver has an HDMI input, use that. If it doesn't, then you will have to use analog or digital audio connectors to plug it in. Read More
Yes. Connect the audio output (digital or analog) of the TV in to the TV input of the receiver. Read More
be more specific. i dont know what you have. but generally... all speakers will plug into the receiver/amplifier. all your sources (blu-ray player, cable box, ect...) will either go to A.) directly to the receiver and you must connect the receiver to your tv. (all connections will be HDMI if the system is current. B.) connect all devices to your tv and plug the surround sound to the tv's audio output jack... usually rca (red… Read More
You can if they provide their own power(you have to plug them into the wall) and they have a audio plug that will plug into you tv like a headphone jack. but usually a tv's speakers are better than standard computer speakers if they are built into your computer then you cant use them except for your computer. Read More
are a audio output device that allows audio to be played from them Read More
Depends on what your definition of "receiver" is, but most of the time - to the amplifier. Consider: if the receiver is some form of a device that receives some signal, and then decodes it to audio, then the receiver will hook into the amplifier, which in turn will drive the speakers (so the speakers go to the amplifier) if, on the other hand, the receiver is a part of a wireless connection between the… Read More
Connect the green 1/8" stereo cable out of the T6160 to the audio output of the TV. If your TV has a headphone or 1/8" line output, you can use that jack. Otherwise, you will need a RCA adapter. Since you TV won't have a surround output jacks, you will only be able to use the front speakers and subwoofer. Read More
If this 'radio' is actually an audio receiver, with RCA inputs, no rewiring needed. simply purchase a 'Y' connector with a headphone jack on one end and RCA left/right on the other. This will allow you to output your iMac's sound into the receiver. If you're talking about an actual radio, i.e. something that does not accept RCA inputs, you could rewire it, but it wouldn't be easy. It would be easier to buy a… Read More
My sony dvp-sr500h 1080p upscaling DVD player has an audio option called dynamic theater the bass is good but rear speakers are too noisy is there a way to turn down the noise of the rear speakers?
Since the signal is sent pre-mixed into the surround sound receiver as a Dolby Digital stream, you will have to turn down the rear channels at the receiver. All good receivers should have a channel level adjustment control through a menu or on the remote control. Read More
You can connect external speakers on a computer on either the headphone socket or sound output sockets on the sound card. You just need the compatible connectors on the audio wires of the music system speakers to connect to these sockets. - Neeraj Sharma Read More
Unless your Bose speakers have an optical digital input, no. There is no audio outputs or speaker outputs on this TV except for optical. Read More
There are essentially two ways to get surround sound out of the Xbox. Via HDMI or via optical (TOSLINK) out. If you have the component video cable, then the end that attaches to the Xbox has an optical out port. Simply attach this to the optical in on your home theatre receiver with an optical cable. If you want to use audio via HDMI, in order to get surround sound you'll have to have an… Read More