wat y do u ask me haha.
There is fault in your monitor. so it is turn negative. go to hardware vendor and make it repair. Hold down control-option-and command and then press 8
Take the negative battery cable off, then turn the ignition to the on position to leave the ignition on for 5 seconds then turn off. Then reconnect your negative battery cable.
Turn key OFF and just unhook the NEGATIVE battery cable for 5 mins and the computer will reset it's self.
Unhook your negative battery cable, turn your light switch on, then turn it off and reconnect the battery. That should reset the computer.
Disconnect your negative battery cable turn on head lights to ride of any stored power (some say to do this some don't your preference I guess) keep negative cable disconnected for about ten minutes and computer should reset.
the very first number is negative. turn that one to the negative underneath it. then turn that on to a negative 2. finally turn that one to the positive 2 then turn
Yes
computer
Disconnect the negative battery terminal and turn the headlight switch on. Then turn it back off. Wait about 30 minutes and re-hook your battery.
1) disconnect negative terminal from your battery. 2) put key into ignition turn to on. 3) wait about 20 seconds, turn key off and pull out. 4) connect negative terminal. 5) start vehicle. it should reset it.
It will turn into A negative number.
computer turn button is located on the cpu or on casing of your cpu by which you can turn off your computer, but it is not a safe way to turn your computer off instead of shut down from the start menu option,