How change washer pump 1995 ford f-150?

Answer 1

Changing most all windshield washer fluid pumps is relatively the same, so I'm going to give you the basic idea here. Disconnect the negative battery terminal. Locate the windshield washer fluid reservoir - it's typically located inside of the passenger side fender of the vehicle. Once you have located it, remove the splash shields in the wheel well, and under the front bumper if applicable to access the bottom of the reservoir. The location of almost every electric washer fluid pump is near the bottom of the bottle. Unplug the associated power harness from the pump, then proceed to remove the pump itself, from the reservoir. It's usually easy to remove, 2 small screws, a rubber grommet, or something similar and it's off. Once you have removed the pump, simply install the new one, then plug the power harness back into it. Fill the reservoir with the appropriate amount of washer fluid, and close the cap. Reinstall the fender liner, and the under-vehicle splash shield at this time. Next reconnect your negative battery cable, and give the system a test run by activating the windshield washer function on your combination switch. Everything should be working, good as new!