depletion region formed by either side of p&n junctions mobile charges accumulate in that places.Type your answer here...
Depletion region is the region where current carriers such as electrons and holes are absent.
depletion region will decrease.
in forward biasing depletion region width decreases and in reverse biasing it increases .
The depletion region is smaller in germanium compared to silicon because germanium has a lower bandgap energy, meaning that charge carriers can easily cross the depletion region and recombine on the other side. This results in a smaller built-in potential and a smaller depletion region in germanium.
depletion region is formed only after recombination of holes and electrons..so in depletion region there are only and only immoble positive and nagative ions...hence,there is no charge carrier..
No, a depletion region is not a good conductor. It is an insulating region formed in a semiconductor material when a voltage is applied, creating a barrier to the flow of current.
The atmosphere does not protect the ozone depletion. It is the region where the ozone depletion occurs.
The ozone depletion is highest at the poles. Specially at the Antarctica region.
depletion layer depletion zone juntion region space charge region bipolar transistor field effect transistor variable capacitance diode
depletion region formed by either side of p&n junctions mobile charges accumulate in that places.Type your answer here...
The depletion region in germanium is small because germanium has a lower band gap compared to silicon. This results in a higher charge carrier concentration and a narrower depletion region. Additionally, germanium has a higher intrinsic carrier concentration, leading to a smaller depletion region.
A depletion region will form at the junction of a p-type and n-type semiconductor in a semiconductor diode. This region is depleted of charge carriers, creating an electric field that prevents further flow of current in the reverse bias direction.