On the tapet cover there are 4 black boots with wires coming out of them. Before you remove any, start from the left hand side and number the wires 1,2,3,4. DO NOT MIX THEM UP. Remove these boots by holding the hard black bit on top. DO NOT REMOVE BY PULLING THE WIRES. A black shaft should come out aswell. These black wires are your ignition leads. Your spark plugs are down the four holes. You will need a socket set with an extension to reach the spark plugs. You also need and extra long socket to fit over the spark plug. Undo the spark plugs like you would a normal bolt. BE CAREFUL NOT TO CRACK THE INSULATION on the spark plugs if you wish to re-use them. You may need to feed a magnet down the hole to grab the electrodes if you are not using a spark plug socket. Re-fitting is the reverse of removal. MAKE SURE YOU PUT THE WIRES BACK IN THE CORRECT ORDER.
how to replace spark plugs on 2006 camry LE
You need to replace the EGR valve. Make sure to replace the plugs too after that.
1342
remove upper intake plenum
97-99 4 cylinder BKR6EKPB-11
How do you change spark plugs in a 6 cly Toyota Camry?
You are not supposed to set the gap. The plugs come with preset one. If you changed it by accident it is highly recommended to replace the plug.
To change spark plugs on a 1994 Toyota Camry, remove the black shafts. The spark plugs are down the four holes. Use a socket set with extension to reach the spark plugs. Replace old spark plugs with new ones.
Like any car it depends on how many cylinders the car has. If it is a 4 cylinder then it has 4 spark plugs. If it's a 6 cylinder it has 6 spark plugs. An 8 cylinder truck has 8 spark plugs
May have to remove the head for access or to drill them out
Look in the required maintenance book that came with the car. Probably 100,000 miles.
In the cylinder head.