You have to remove the door panel. How to that you can find here http://wiki.answers.com/Q/How_do_you_remove_door_panel_on_1999_Camry&action=edit§ion=new.
You have to remove the door panel, after that you will be able to replace the speaker.
remove the door panel
remove door paaels u will need a screw drive idiot
You need to pull the inner door panel off to gain access to the speaker
Remove the door panel and then you get access to the speaker
YOU MUST REMOVE, UNFORTUNATELY, THE INNER DOOR PANEL TO GET TO THE CLIPS OF THE COVER....BB
The 1992 Toyota Camry front dashboard speakers measure 4.5 inches in diameter. The front door speakers measure three inches by five inches.
You need to remove the Interior door panel. From there you can gain access to the speaker and replace it as needed.
You have to remove the door panel to access handle screws. After that you have to disconnect pulling rods and replace the handle with another one.
No you don;t need to pull off the door trim to access the stock speaker. You just need to remove the door handle and the grill section. Installing a larger speaker is possible but requires more work as you need to remove the door card and make a custom mounting plate for the speaker itself Try to use Toyota speaker adapter plugs so you don't need to cut wires and mess the electric system up. You can get them from Ebay or Amazon.
Yes, you should be able to do that.
You don't have to pull the door panel off... the speaker grille snaps in place. Use a small screwdriver to carefully pry the grille from the panel