0
How do I ease stiffness of door locks on 1995 GMC Suburban I replaced lock actuators greased locks with white lithium now fine to lock with remote or in car but doors 3 and 4 are too stiff to unlock?
Wiki User
∙ 15y ago
Spray a little silicon spray lube inside the tumblers (where the key gos in) this has been working on mine. oldgrizzly
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
When was Greased created?
Greased was created in 1996.
What is the duration of Greased Lightning?
The duration of Greased Lightning is 1.6 hours.
When was Greased Lightning created?
Greased Lightning was created on 1977-07-01.
Do the tire rods need to be greased in a 2006 GM Sierra?
You must mean TIE RODS. -If there is a nipple, they must be greased. Many are sealed units and can not be greased.
Why are roller coaster track greased with oil?
they are greased with oil so the rollercoaster will ride smoothly
You have a rumble in the front end of your 99 Z71 4x4 when in 4 HI and you accelerate it goes away when you let off the gas?
check the u-joints on your driveshafts.they may need to be greased or replaced.
Cycle chains and machine parts are greased regularly why?
For lubrication, which reduces wear on them. In general lubricants pick up dirt and become less effective over time, and need to be replaced periodically.
Why is there clunking noise in the rear of my 2001 Pontiac Sunfire?
For a start. It has to do with the rear suspension in the struts. GM greased them for me but that did'nt last. They need to be replaced and that can be costly, so I just live with it.Hope this helps ....Ken
A greased bird?
Oily
What are the release dates for Greased Lightning - 1928?
Greased Lightning - 1928 was released on: USA: 29 July 1928
How long should the lower ball joints last on a 98 Chevy blazer can't get more than a year out of a set?
YOU CAN GET A FEW YEARS OUT OF A SET OF BALL JOINTS, BUT THEY WILL NEED TO BE GREASED REGULARLY. USUALLY YOU WOULD HAVE THEM GREASED AT THE SAME TIME AS YOU HAVE YOU CAR SERVICED(OIL CHANGE ECT). A NEW SET OF BALL JOINTS MUST BE INSTALLED CORRECTLY USING THE PROPER TOOLS OR BY A PROFESSIONAL. SOME MANUFACTURERS OF AFTER MARKET PARTS HAVE POOR QUALITY PARTS AND THEY DO NOT LAST AS LONG AS THE ORIGINAL MANUFACTURERS PARTS DO. MY FATHRE HAD A SIMILAR PROBLEM WITH HIS CHEV SUBURBAN. WE HAD TO REPLACE THE BOTTOM BALL JOINTS A SECOND TIME WHEN WE HAD ONLY A REPLACED THEM A YEAR BEFORE. LUCKLIY FOR US THE MANUFACTURER OF THE AFTER MARKET PARTS HAD A WARRNTY ON THE BALLJOINTS AND WE HAD THE PARTS REPLACED WITH A NEW SET FREE. YOU MAY WANT TO CHECK WITH THE PART SUPPLIER YOU PURCHASED YOUR PARTS FROM TO SEE IF ANY WARRANTIES APPLY.
What does lightly greased mean?
lol
