Sticky plug wires can be a big pain. I've used a pair of pliers to rotate them back and forth around the plug to loosen them with pretty good luck. Presuming you don't mind replacing them, you could also just cut up the length of the boot with a utility knife and peel it off. A friend of mine suggests poking a hole in the side of the boot and sticking the nozzle of a can of WD-40 in the hole to give it a good spray. I can't vouch for this one, but it sounds like a danged good idea to me. I'm a firm believer that WD-40 can solve almost any problem that Duct Tape can't ;)
spark location on a 1999 Lincoln continental
The firing order should be 1-5-3-6-2-4.
Changing the spark plug wires in your 1999 Mercedes-Benz is quite simple. The spark plug wires simply lift off. The new spark plug wires can be pushed onto the spark plug. It is best to change one wire at a time.
they are attached to the ends of the spark plug wires
6
You should have C.O.P. ( coil on plug) there are no wires.
It could be the timing is not set correctly. Possibly one or more of the spark plug wires have been put on the wrong plug.
The 1999 model, 90 hp Mercury outboard requires an NGK BUHW-2 spark plug, standard plug wires are acceptable.
Beneath their coils.
check the gappings of your spark plugs, it must be uniform.
one at a time
replace spark plugs @wires