0
First, you have to pull the back seats down. Next you need to take the two plastic column type things covering up the rear window defroster wires. (They're held on by clips, so just pull the plastic columns.) Once you've done that you need to take off another plastic support that is found behind the rear seats if you had the seats up. it is held on by four plastic pins which can be pulled out by hand. once you've gotten the four pins out, pull the support down. next you can lift up the whole back cover that covers the speakers. (to fully take the cover off, you need to unscrew two bolts in the trunk holding the cover down. Note: they are on there pretty good.) once you've done that, you can take the speakers out. they are held in by three clips: two in the front and one in the back. next clip the wires to the speakers. take out the speakers. you may need to keep the plastic clip around the stock speakers for your new speakers so the new ones can properly fit. all you need to do is unclip the four litttle clips holding the speaker in place. now you need to wire up the speakers. in the alero, the left speaker has dark blue and light blue wires. the light blue is negative, the dark blue is positive. For the right speaker there is a yellow wire and a brown wire. yellow is negative, brown is positive. wire the speakers up and clip them down like the stock speakers and then reassemble everything else taken off. you should have a great time.
><><><><><><><><
I have followed these instructions to the letter and had 100% results.
My replacement speakers I installed were a pair of KAPPA 6x9
The sound is so amazing AMAZING, I just had to do more after I heard the sound.
Now I have the Basswork ported box Model HPR12 with one MTX TT6512-04 subwoofer speaker, a pair of Kappa 6x9 don't have the model number on hand, and I have a pair of Kappa 6.5 in the front door. My amps are MTX TC2002 for the sub bridged of course and one four channel MTX TC 4004 to handle my front and rear Kappa speakers.
My Radio now is a Pioneer DEH P9800BT.
I use my car more often now and spend less time in front of my 63in LCD TV with the BOSE V20 system
Follow the instructionsand get ready to pimp your ride once you hear what a stock radio will sound like once you have good speaker. its amazing...
><><><><><><><><
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Why have 4 wire per rear speaker on a 2001 Alero?
two wires are subwoofer output negative and two wires are positive
How do you change the rear speakers in a 2001 Kia Sephia?
Remove the cover from your 2001 Kia rear speakers. Remove the rear speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install the new rear speakers.
How do you remove the Rear deck to change rear speakers in a 2000 dodge stratus?
REAR SPEAKER - JR41 Disconnect and isolate the battery negative cable. Fold down the rear seat backs. Remove C-pillar trim. Remove lower quarter trim behind rear seat backs. Remove fasteners from rear shelf trim. Pull out trim to access speaker. Remove speaker screws. Disconnect wire harness connector. Remove speaker (REAR SPEAKER-JR41). REAR SPEAKER - JR27 Disconnect and isolate the battery negative cable. Using a trim stick, pry the speaker grill from the trim panel. Remove speaker mounting screws (REAR SPEAKER - JR27). Remove speaker from trim panel. Disconnect wire harness connector from speaker.
How do you replace the speakers behind back seats in an alero 2001 without breaking anything?
1: Lay rear seats down. 2: Remove 4 push plugs in plastic trim. Remove trim. 3: Remove the trim from around the rear window. Both sides. Be carefull not to break wires or connectors for defrost. 4: Remove rear window pad. Speaker grills are attached to this. 5: Push the black tabs to raise speakers out. Tabs are on the left and right of speakers. 6: Disconnect the speaker wires. Not hard to do. DO NOT TRY TO REMOVE THE SPEAKER GRILLS WITH A SCREWDRIVER. They are part of the R/Window pad.
How do you remove the rear speakers in a 1994 Chevy cavalier?
Remove the rear speaker covers in your 1994 Chevy Cavalier. Remove the rear speaker retaining screws. Remove the wiring harness from the back of the rear speakers.
Alero speaker size?
It depends on the year of the Alero. But for most General Motors vehicles the speaker size is 4 inch by 6 inch for the front door speakers and 6 inch by 9 inches for the rear.
How do remove rear speakers on a 2000 Pontiac Sunfire?
Begin by removing the cover from your rear speakers. Remove the rear speaker retaining screws. Remove the wiring harness from the back of the speaker. The rear speakers will come out.
How do you get the rear speakers to work on a 2000 Alero?
hook the speaker wires up to them and turn the volume up.
How do you remove the rear view mirror on a 2000 mustang conv?
Remove speaker grill, remove screw holding speaker, screws to the mirror are behind speaker
How do you remove the rear roof speaker cover and remove the speakers?
on what car???
How do you change the back speakers in 1995 cavalier?
* Remove the rear seatback * Remove one of the rear quarter trim panels * Release the four plastic push-in retainers that secure the rear parcel shelf disengage the rear seat belts from the slots in the parcel shelf and remove the parcel shelf * To disengage either rear speaker push down on the tab on the front of the speaker spacer lift the speaker and pull the speaker forward.Unplug the electrical connector and remove the speaker from the car
How do you replace rear speakers on a 1997 500sl Mercedes?
You have to remove the rear seats to be able to remove the rear side panels. Then you have to disconnect the wires to the speaker, unscrew the speaker, then reinstall the new one.
