go to kragen's get cable to fit and just follow and replace..............
Remove old one from battery and starter solenoid and replace with new following the same rounting
To change the positive battery cable on a 1988 Jeep Cherokee trace the end of the cable to the starter. Unplug the battery then remove the cable from the starter. Measure the old positive cable with the new and be sure to replace the unit at the right size.
a beginner could do it. just be sure to disconnect battery first. Couple of bolts, battery cable..and its off.super simple
buy the proper battery and the cable will fit, or replace the cable with on that will
From battery to starter solenoid
Either replace entire cable or cut off with a hacksaw and replace cable end
Remove - battery cable Remove + battery cable from battery and starter solenoid Route new cable following original routing Connect to starter solenoid Connect to + battery terminal Connect - battery cable
Unhook the cable from the Cavaliers battery. Find the opposite end of the cable and pull it out. Fit the new cable in following the old cables route. Connect the non battery end of the cable, then hook to the battery.
Remove - battery cable Remove + battery cable Remove hold-down bolt on front bottom of battery tray Remove battery
The positive battery cable is red.
Disconnect the cable from the LeSabre battery. Follow the route of the cable and disconnect the other end. Pull the cable out, then fit the new cable in the same direction. Connect the non battery end, then connect to the battery.
Yep. I had the same problem too, with my 1994 Jeep Cherokee. It seems very difficult to find the original style battery cables for these models. try www.wholesalemopar.com. Do a search for "POSITIVE CABLE" on their site, and it will show you the applications they have the cable in stock for.