answersLogoWhite

0


Best Answer

If catalytic converter is bolted on you can check them by taking them off and checking for cracks in the passage ways, if it is welded or you don't want to take them off to check you can take a drill and make two small wholes; one in front and one behind the CAT (be sure not to drill in the CAT, but in the pipes in front and behind it) get a pressure gage designed for such a job, [while the vehicle is running] check pressure of both holes, if the rear hole has a considerably lower pressure reading than the front reading then you know that the passage way is being blocked, you will see that the pressure in the front hole will be considerably greater this is because the gases are building (one or two psi difference isn't bad 5 or more lbs difference you might consider taking to a local muffler shop who can hook you up with a universal CAT!)

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do I you tell if catalytic converter needs repair?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How can you tell if the catalytic converter needs replacing?

tap on it and if it rattles ,its done


How do you tell if an oxygen sensor is upstream or downstream on a 2002 Chevy silverado 1500?

Upstream would be before the catalytic converter. Downstream would be after the catalytic converter.


Do catalytic converters go bad in 1998 jeep Cherokees?

Yes. some Cherokees had recalls on a computer update and a new converter call your local dealer they can tell you free repair if recalled


How can you tell What is bad the catalytic converter or is it a sensor?

replace sensor,catalytic converters smell like rotten eggs when going bad


How can you tell exactly what a used catalytic converter is worth as scrap?

Take it to your local salvage yard and they will offer you a salvage price for the converter.


Oxygen sensor locations on a 2004 dodge stratus?

Oxygen sensors go in the exhaust pipes. There should be one before the catalytic converter and one after so that the computer can tell how well the catalytic converter is working.


Would you be able to tell if the catalytic converter was stolen?

YES ! as soon as the engine was started , you would notice how noisy it was The catalytic converter(s) are in the exhaust system before the muffler , and removing the catalytic convertor just leaves an open exhaust pipe - extremely loud


Warranty 2003 Toyota matrix catalytic converter California?

I have a 04 Toyota Matrix that has a bad catalytic converter that I need to get replaced too. I have found that Toyota's warranty on the catalytic converter is 8 years or 80,000 miles, which ever comes first. If your car is under those requirements than you can have a Toyota Dealership repair it for free. Unfortunately my Toyota has over 120,000 miles so I will have to pay for mine out of pocket, which can cost up to $1500. If you call Toyota directly and tell them about your catalytic converter they will document it and if enough people complain, then they will recall it!! 1-800-331-4331 Plus, if you have to pay for the repair now and later on they recall it, you will get reimbursed... So I suggest anyone that has a issue to call Toyota and make sure it is documented!


What is the warranty on a catalytic converter?

i think it's something like 3-5 years. if not have a look on the website u got the catalytic car from and that should tell you.


Can Dodge Intrepid obdii tell you which O2 sensor is bad?

Yes, It will tell you bank 1 or 2 then sensor 1 or 2 ...Bank 1 is the exhaust pipe coming from the side of the engine with cylinder 1. Sensor 1 is before the catalytic converter, and sensor 2 is after the catalytic converter.


How do you tell if your catalytic converter went bad?

Loss of power, poor fuel mileage, converter gets red hot, possibly check engine light will come on.


How can you tell if a catalytic converter isn't working?

You have poorn gas milage and when you step on the pedal your car has no power. You can tell mainly by it not having enough power