you must have the car on a lift or jack stands and level as you will need to be under the car with the engine running. Take off the transmission bolt that is on the side of the pan.The fluid should be to the at the bottom of the hole. Fill with the proper fluid till it starts to flow out. The engine must be running when you check or fill as the fluid will come out after taking the bolt off without the engine on. You will have to fill through the same hole.
In order to check the transmission fluid on a 2000 BMW 323i, you must first determine whether the transmission is manual or automatic. If it's automatic, it's not suggested that you change it yourself. If it's manual, you should look in the user's manual for instructions.
is the brake fluid
BMW uses there own special fluid and you have to contact a dealership to get it.
The power steering fluid is ATF fluid on BMWs and you can check it from the cap in front of the engine that says ATF fluid only. Take the cap off and on the bottom of the cap you will see a stick, check it there.
it is located in the trunk
2800$$
Type Dot 4 Brake Fluid Will Be Ok
becoz they have three transmissions..
It is important to maintain the levels of fluid in a vehicle. The engine oil capacity of the 1999 BMW 323i is 6.9 or 7 quarts of oil.
The vehicle speed sensor will be located above the transmission output shaft.
Check the fuse.
it's located at the bottom of the car, u have to get underneath to see it.