I had the same problem and just looked under the hood for another fuse box.It is located on the paseenger side, open the box and you will see 2 fuses 20A in yellow, either one or both of them have blown. All you have to do now is replace them. Also check under the steering wheel in this fuse box as well.
DEFINITELY NOT A DRY SOCKET... YOU WOULD KNOW IF YOU HAD A DRY SOCKET. BASICALLY YOUR SOCKETS ARE JUST CLEAN.
No.
1)Socket 2)Server Socket Server socket is used for normal two-way socket communication. Socket class allows us to read and write through the sockets. getInputStream() and getOutputStream() are the two methods available in socket class.
what is the difference between plug ang socket?
Impact sockets are made of softer metal.
A BSD socket is basically an early version of a POSIX socket. It is used to connect a Unix system to the internet.
Pentium 4 sockets were sockets numbers Socket 423 for early Pentium 4's. Then socket 478 for Pentium 4, Pentium 4 Extreme Edition and Celeron and socket T (LGA 775) for Pentium 4, Pentium D dual core, Celeron D and Pentium Extreme Edition.
Socket 1366 Socket 1156 Socket 1155 Socket LGA 2011 are in use presently
zero insertion force sockets (see page 178 in A+ Guide to Managing and Maintaining Your PC) "PGA, SPGA, and LGA sockets are all square or nearly square. So that even force is applied when inserting the processor in the socket, all current processor sockets have a lever on the side of the socket. These sockets are called zero insertion force (ZIF) sockets, and this lever is used to lift the processor up and out of the socket. Push the lever down and the processor moves into its pin or land connectors with equal force over the entire housing."
Items do have sockets in world of warcraft. They were added in The Burning Crusade expansion and you need a jewelcrafter to cut gems for the sockets.
Socket 478
An impact socket is a tool used for loosening or tightening but is manufactured to withstand greater stress than a normal socket wrench. Impact sockets are specially designed to be used with air or electric power tools.