0
In windows 8/ 10, search for and run the file "MSCONFIG"
Wiki User
∙ 7y ago
Add your answer:
Earn +20 pts
Configure NAT to allow PC3 to ping PC1?
R3#configure terminalR3(config)#access-list 104 permit ip 10.0.0.128 0.0.0.127 anyR3(config)#ip nat inside source list 104 interface Serial0/0/0 overloadR3(config)#interface fastEthernet0/1R3(config-if)#ip access-group 104 inR3(config-if)#ip nat insideR3(config-if)#exitR3(config)#interface Serial0/0/0R3(config-if)#ip nat outsideR3(config-if)#exitR3(config)#interface Serial0/0/1R3(config-if)#ip nat outsideR3(config-if)#endWriting by vanhuuvt32bonphuonglanha@gmail.com
Which set of commands will enable a network administrator to remotely manage a LAN switch?
Switch(config)# ip default-gateway 192.168.1.254Switch(config)# interface vlan 1Switch(config-if)# ip address 192.168.1.1 255.255.255.0Switch(config-if)# interface fa0/1Switch(config-if)# switchport access vlan 1
Which command or commands will require authentication to access the privileged exec mode?
RTRA(config)# line vty 0 4 RTRA(config-line)# login RTRA(config-line)# password cisco
What file store computer password?
the SAM file in the config folder of system32.
How do you get to your computer?
Just walk to your computer.And if you want to know how to connect to your computer from other remotely:obtain configuration id of your pcinstal remote access software on your system and other.connect you system to internet and other system to internetthen use you computers config id to access.
Which option is a valid configuration line for enabling access list 102 on a vty line?
router(config-line)#access-class 102 in
How can an IP address for a network device be assigned to a particular network?
Router(config)# hostname AdminAdmin(config)# enable secret cangetinAdmin(config)# interface fa0/1Admin(config-if)#ip address 192.168.1.22 255.255.255.248Router(config)# hostname AdminAdmin(config)# enable password cangetinAdmin(config)# interface fa0/1Admin(config-if)# ip address 192.168.1.22 255.255.255.248Router(config)# hostname AdminAdmin(config)# enable secret cangetinAdmin(config)# interface fa0/0Admin(config-if)# ip address 192.168.1.22 255.255.255.248Router(config)# hostname AdminAdmin(config)# enable password cangetinAdmin(config)# interface fa0/0Admin(config-if)# ip address 192.168.1.22 255.255.255.248
Where do startup-config and a running-config reside in Cisco equipment?
startup-config resides in NVRAM and running-config resides in RAM.
Which location of router memory is cleared when you erase the start up-config?
It is the NVRAM or the Non-Volatile Random Access Memory.
What command is required to allow remote access to this switch from hosts outside the local network?
NA-SW1(config-if)# no shutdown
How do you transfer mp3 files on one computer to another computer?
You could either burn a CD,use a pen drive,or conect the 2 computers via LAN and config it such tht u have access to both the computers, or if the 2 computers are far away u vud create a VPN via the internet!!!
What is the command to remove the console password router?
Remove Console password router>enable router#configure terminal router(config)#line console 0 router(config-line)#no login router(config-line)#no password router(config-line)#exit router(config)#exit
