In windows 8/ 10, search for and run the file "MSCONFIG"
R3#configure terminalR3(config)#access-list 104 permit ip 10.0.0.128 0.0.0.127 anyR3(config)#ip nat inside source list 104 interface Serial0/0/0 overloadR3(config)#interface fastEthernet0/1R3(config-if)#ip access-group 104 inR3(config-if)#ip nat insideR3(config-if)#exitR3(config)#interface Serial0/0/0R3(config-if)#ip nat outsideR3(config-if)#exitR3(config)#interface Serial0/0/1R3(config-if)#ip nat outsideR3(config-if)#endWriting by vanhuuvt32bonphuonglanha@gmail.com
Switch(config)# ip default-gateway 192.168.1.254Switch(config)# interface vlan 1Switch(config-if)# ip address 192.168.1.1 255.255.255.0Switch(config-if)# interface fa0/1Switch(config-if)# switchport access vlan 1
RTRA(config)# line vty 0 4 RTRA(config-line)# login RTRA(config-line)# password cisco
System config refers to the configuration settings and parameters of a computer system that dictate how hardware and software components interact. It includes settings related to networking, storage, display, security, and more. Modifying system config can affect the performance and behavior of the computer system.
the SAM file in the config folder of system32.
Just walk to your computer.And if you want to know how to connect to your computer from other remotely:obtain configuration id of your pcinstal remote access software on your system and other.connect you system to internet and other system to internetthen use you computers config id to access.
router(config-line)#access-class 102 in
Router(config)# hostname AdminAdmin(config)# enable secret cangetinAdmin(config)# interface fa0/1Admin(config-if)#ip address 192.168.1.22 255.255.255.248Router(config)# hostname AdminAdmin(config)# enable password cangetinAdmin(config)# interface fa0/1Admin(config-if)# ip address 192.168.1.22 255.255.255.248Router(config)# hostname AdminAdmin(config)# enable secret cangetinAdmin(config)# interface fa0/0Admin(config-if)# ip address 192.168.1.22 255.255.255.248Router(config)# hostname AdminAdmin(config)# enable password cangetinAdmin(config)# interface fa0/0Admin(config-if)# ip address 192.168.1.22 255.255.255.248
startup-config resides in NVRAM and running-config resides in RAM.
On a Cisco switch, NVRAM (Non-Volatile Random Access Memory) is typically located within the switch's internal storage. It is used to store the startup configuration file, which is loaded when the switch boots up. You can access and manage the contents of NVRAM through the command-line interface (CLI) using commands like show startup-config and copy running-config startup-config.
NA-SW1(config-if)# no shutdown
It is the NVRAM or the Non-Volatile Random Access Memory.