try this sight for the harness: www.scosche.com/products/sfID1/151/sfID2/158 but make sure you call and talk to a support adviser to make sure you get the right one. If you have a round port on the back of your system you will need a the right harness as it supplies power to the power amp otherwise you will not get any power to you speakers. But you may also run into another problem...some Mitsubishi systems have anti theft devices built into them and to obtain the "unlocking procedure and code" you will have to contact Mitsubishi.
Connect the wiring harness to the back of your 2003 Mitsubishi Lancer CD player. Secure the CD player with the retaining bolts. Connect the ground wire.
try www.installdr.com
can you used a 2.0 liter complete witing harness for a 2.4 mitsubishi eclipse spyder engine
Connect the wiring harness to the back of your 1980 Ford CD player. Secure the CD player with the retaining screws.
Six-year the oil pressure gauge for your 1999 Mitsubishi eclipse with the retaining screws. Connect the oil pressure gauge wiring harness.
Remove the wiring harness from the back of your 2003 Mitsubishi Eclipse alternator. Loosen the alternator tensioner bolt. Remove the alternator belt. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
To install an aftermarket CD player the center console needs to be removed. Once removed a after market wire harness will need to be installed so the CD player can function properly. Install the CD player and connect all the wiring.
Visit your local Best Buy store, they have a mounting kit that adapts an aftermarket CD player to fit the opening. They also have a wiring harness that plugs directly into the factory wiring. You will have to solder the wiring harness to the CD player, but this is the best way to go. If you follow all of the directions the install will look like a factory installation.
Attach the wiring harness to the back of your 1996 Chevy Suburban DVD player. Secure the DVD player with the retaining screws. There will be four retaining screws.
eBay
Find a company that sells wiring harnesses and they will be able to get a harness. Most of these include the wiring details. Look on eBay for 'Stereo Wiring Harness'
Begin by securing your CD player with the two retaining screws. Connect the wiring harness to the back of the CD player. Put the retaining cover on to the front of the CD player.