0
How do i open the hood of my 2002 ram if the latch cable doesn't work?
Wiki User
∙ 9y ago
If the cable or lever isn't "broken" try this, first be sure the hood is shut tight then operate the hood release, then go around to the front of the vehicle and by using the side of your fist give the front of the hood a firm thump. Sometimes this will release the hood from the latch. If it opens give the latch mechanism a good lubrication before you shut the hood.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
How do you open a hood on a 2002 accord when the cable release is not working from the latch the cable is not broken at the latch but under hood?
From under car... its not too bad on a lift you can find cable near the hood need to get the inner wire and pull with pliers
How can you open your 2002 Kia Spectra hood if the cable release is broken?
If the cable release is broken for the hood on a 2002 Kia Spectra, a person could crawl under the car and see if they can locate the broken part of the cable. If it is still attached to the hood, they could pull it to trip the hood latch. Otherwise, the car will have to be put on a hoist, and a long pole used to trip the hood latch.
How do you fix the internal hood release in a 2002 Toyota Camry?
the cable slid out of the latch and needs to be reconnected
Where do you locate the hood latch under the hood when the cable is broken?
dodge truck broken hood latch
How do you open the hood on 1992 Civic if your hood latch cable is disengaged under the hood?
If you mean the cable that goes to your latch and its snapped or something easiest way to do it is basicly grab a hold of the cable and pull on it and of latch would.
How to repair a hood latch cable on 2003 Hyundai elantra?
To repair a hood latch cable on a 2003 Hyundai Elantra, you have to take it to your local mechanic or dealership. The hood latch cable should only be reconnected with an experienced hand. While you can use wrenches and screwdrivers, the latch cable may come loose again.
How open hood for mr2 spyder?
Classic problem with Spyder. The latch cable has problems releasing the engine latch. Pull hood release inside car then go arround to back and push down on hood. It should pop the latch. Try several times if that doesnt work the first time.
How do you change the hood latch cable on a 1990 Pontiac Firebird when you cannot find the answers in your repair manual?
It depends on what is wrong with the cable. When you pull the hood release within the car, is the latch not popping? If you can get the hood up at all, then you should look at the actual latch system where the cable runs, there is a metal clip that holds the cable to the latch. Have another person pull the interior latch release and watch the cable.
Cable for the hood broke on Nissan altima 2005?
cable broke release latch for the hood can't open it
How do you change hood latch cable on 2003 expedition?
open hood go to the center latch dislodge the plastic cable retainer remove cable loop from the latch remove the two bolts from cable retainer left of the steering cable will drop thread it through the firewall from outside in reverse procedure.
Is the hood latch electronic on a 2005 Chrysler 300?
No, cable.
How do you repair the hood latch for the 1991 Mercedes 190E 2.6 the handle in the car that opens the hood does not work it does not pop the hood?
The hood is openned by a cable that links the handle in the car the hood latch. If the cable is broken or detached then the hood will not open. The cable has two parts, an outer covering and the actual cable that pulls on the hood latch when the inside handle is pulled, you need to check the inside handle to see if the cable is still attached to the handle, also you need to check the hood latch to see if that end is still attached to the hood latch. If either is disconnected the you will need to get appropriate hardware(nuts,bolts etc) to attach it back but if the cable is broken it has to be replaced complete. This you might or might not be able to do depending on you skill and proficiency with tools.
