0
How do i remove centre console of Mazda 6 to change gear shift indicator light bulb?
Wiki User
∙ 12y ago
Unscrew the shift knob. squeeze the plastic underneath - there are 4 tabs holding it in; it will lift out. There are a few more sections that will come out similarly - your entire console will come out that way.
There is a great video on how to do this here.
http://www.YouTube.com/watch?v=9pggHl_sCOo
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you repair the console shift indicator light of a 2000 Olds Intrigue?
Just remove the console and you can get to it.
Where is the airbag ecu on a Peugeot 206?
remove the centre console and its under there, around the handbrake
How do you remove the center console on a 1995 Chevy Beretta?
Hi there, there should be four screws inside the centre console if you undo them your well away :)
How to Remove centre console 2009 Subaru Forester?
I don't have the answer for that one but it should be in your owners manual.
How do you replace the gear shift indicator light bulbs a 1997 Subaru Outback?
You have to remove the console cover. This starts with two screws in the console storage tray.
Airbag ecu on Peugeot 206?
What about it? If you want to know where it is, remove the centre console from around the handbrake and its under there.
Where is Renault clio dci diagnostic port?
Remove the ash tray from the centre console, just behind there!
How do you change a indicator stalk on your 306?
how to remove indicator stalk and cowl from Peugeot 306 lx
How do you change the burned out light on the shift console on a 1998 Oldsmobile intrigue?
STEP 1: Remove the console topOpen the console arm-rest and remove the two bolts near the latch.Lift the console from the now un-bolted end and carefully pry up from opposite end (there are 4-6 tensioning-pins holding the remainder of console top.BE CAREFUL - you have a plug in the console top for the traction control.Lift up the console top and adjust it out of the way.STEP 2: Remove the shifter position indicatorIf you're REALLY god at working in small spaces, you MIGHT be able to remove the bulb socket from the shift indicator without removing it, but realize you have to turn/twist the bulb socket about 90 degrees and then pull down.The bulb is on the driver's side of the shift indicator. Remove the indicator by removing four bolts and lifting up slightly to gain access. Twist the bulb out of the indicator module, replace bulb, and return bulb socket into the shift indicator.Turn ignition key on to assure the new bulb is working properly.STEP 3: Reassemble the consolePlace the shift indicator module back in place and put in the four bolts.Set the console top tension-pins into place and press back down working from dash-end back to console glovebox compartment.Insert the two console-top bolts back in at latch area of console glovebox.DONE!
Where is the heater matrix on a Daewoo Leganza cdx?
Remove dash,centre console,heater box and you'll find it in there
Where is the heater core on a 2000 Daewoo leganza?
You can't see it until you remove the dash and centre console,then remove heater box and you'll find it in there
Diagram how to change indicator bulb peugeot 206?
The Peugeot 206 is a subcompact car. One has to remove the full light to change indicator bulb. A spanner can be used to remove the light cluster. Break the spanner off, and rebuild.
