Want this question answered?
how to reset abs warning light on 2000 gmc Yukon
After correcting the cause of the fault the vehicle must be driven above 40kph to reset the ABS warning light.
The abs light is on because there is a problem with the abs system. The light will remain on until the problem is fixed. Once the problem is fixed the light will reset itself after a short drive.
By fixing the problem which is causing the light.
The abs light is on because there is a problem with the abs system. Until the problem is fixed the light will remain on. Once the problem is fixed the light will reset itself after a short drive.
Take it to the stealership and get your brakes checked
Remove battery cable for one minute .
Your problem is not the warning light. The light is on because there is a problem with the Anti-Lock Brake System (ABS). Have it repaired and they will reset the light.
i would go to your local reanault dealer
The ABS warning light is on to tell you that there is a problem with the ABS system. Take your car to a knowledgeable mechanic and hook it up to a diagnostic tool and source the problem. It can be as simple as a ABS sensor/wire conector or it may be the ABS modual. Fix the problem and the light will go away. Hope this helps. "G"
Bring to a shop that has an ABS scanner
The abs light came on because there is a problem with the abs ( Anti-lock Brake System). The abs light will not reset until the problem has been fixed. Once the abs system is repaired the light will reset itself.