Want this question answered?
yes as long as the doors are the same there is no difference between glass in electric and manuel windows
should be an Allen head or torx screw in the center of the crank.
To open cans electrically, instead of using a manual crank.
Dear User, You should be able to open up the side panel fairly easy and you can replace the electric crank with a hand crank. or just fix the electric crank
Their is a special tool to remove manual crank window cranks and it will work for almost any car. You can pick one up at auto zone
Theres a tool that will engage the clip on the back side of the crank, you can find the tool at most auto parts stores.
You would need to remove the window regulator, and the motor. Replace them both and drill a hold through your door panel where the crank will come out.
remove the clip retaining crank to the regulator shaft, this requires a special tool available at most parts houses.
The difference between an electric sewing machine and a manual sewing machine is only the method of propulsion. The electric machine uses an electric motor, while the manual machine uses a hand crank or foot pump to power it. The actual sewing machine is the same.
This page will tell you how to do this......good luck. http://www.maintainyourcar.co.uk/1999_hyundai_accent_window_winde.htm
Look in the back panel of the headliner ahead of the rear window where the manual crank of the sunroof is.
In almost all makes of car you have to replace the window regulator. That's the entire mechanism that holds the window and raises and lowers it.