There is an existing plug behind the left side tail light (look up from under the bumper). Get the proper tee-connector and plug it in.
A wiring diagram for the trailer hitch on a 98 Explorer can be purchased at your local auto parts store. A repair book for the make and model of your vehicle will have the diagram included in it.
Yes, Reese Hitch lists a CLASS 2 hitch Part # 06020. The fram has to be drilled and there may need to be some modification to the muffler/tail pipe heat shield.
Absolutely! Buy a BrenderUp. I have a BrenderUp horse trailer and pull it with my small 98 ford Explorer w/out a tour package. Hardly know the trailer is behind me.
What about it?
Yes. You can put a hitch on a Dodge Neon.
If you have a trailer hitch, check your light connector from underneath where the wires connect to the vehicle wiring. Looks like you may have a short.
The location of the factory alarm on a 1998 Ford Explorer is in the driver's door. The alarm can be disarmed by grounding the dark green/purple wire found in the driver's side kick panel wire pack.
Will an engine from a 98 explorer fit a 97?
Hello,Have you checked to see if you have the factory wiring? Below is a link to a useful article discussing trailer wiring on that model, which gives you thelocation to check and other information. Like you, I have a 98 explorer myself.http://www.explorerforum.com/Singleton/web/pages/trailerwiring.htmlGood Luck!David
well if the 2001 is in the same generation as the 98-2000, then the wire is gray with a black stripe and can be found in the harness that goes to the fuse box under the hood.
where do you find the unlock relay switch on a 98 ford explorer
Well, if you mean "take OUT a subwoofer" then all you need to do is unplug the speaker wire from the amp or undo the wire from the door speakers. Please restate your question and be more specific.-Shocker