1997-1999 Engines The fuel pump is located inside the fuel tank. Make sure you have a new fuel pump gasket before installation. To remove: 1) Relieve the fuel system pressure 2) Disconnect the negative battery cable 3) Remove the rear seat cushion and unplug the electrical connectors from the fuel pump. 4) Unfasten the four pump access cover screws and remove the cover. 5) If equipped,unplug the pump electrical connector located under the cover. 6) Unfasten the fuel line clip(s) and disconnect the line(s) from the pump. 7) Use a fuel pump locking ring removal tool or a brass drift and a hammer to unfasten the pump locking retaining ring. 8) Remove the fuel pump and the gasket from the tank To Install: 9) Install a new gasket and place the pump into position in the tank. 10) Install the pump retaining ring. 11) Connect the fuel line(s) to the pump and install the line retaining clip(s) 12) Install the access cover, then tighten the retainers. 14) Attach the pump electrical connector(s) 15) Install the rear seat cushion. 16) Connect the negative battery cable 17) Start the car and check for proper operation.
Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.