Honda calls it a damper. If you want the front damper. Remove the brake hose clamps from the damper remove the damper pinch bolt (on the bottom). Remove the damper fork bolt. then remove the damper by removing the two 10 mm nuts on top. Do not try to Disassemble the Damper without a spring compressor.
Remove the bolt on the botton of the Strut. Detach the steering Knuckle. Remove the three nuts on top and remove the strut from the car. Do not try and disamble the strut without a spring compresor. Get a whole new strut. Good luck
It is on driver side top of firewall right behind strut
replace coil springs in a nissan 300zx
righthand side firewall behaind the strut bar.....
You will need to compress the strut spring with a spring compressor. Be very careful as the spring will be under several hundred pounds of pressure. Remove the nuts on each and of the strut. Reverse the process to install the new strut.
no you do not have to remove the strut just take the lower control arm lose.
The cost to replace a front strut rod bushing on a 1998 Nissan Maxima is between $50 and $150, for a person who does it on their own. The cost varies based on the part brand or kit bought.
First, open the hood. Now remove the brake line support so that you can begin to get to the strut. Remove the pinch bolt that holds the strut at the bottom. Drop the sway bar that is connected to the strut. Now remove the bolts the interior bolts that support the strut. Remove the old strut and replace it with the new one.
To replace the front struts on a 2000 model Hyundai Sonata, you will first need to remove the tires. There will be 3 nuts on top of the strut mount. You will need to remove the 2 bolts that connect from the strut to the knuckle. Then you will need to remove the ABS sending unit as well as the front brake hose. Once these components are removed, you can remove the strut. In order to remove the strut, you will need a special tool to compress the spring. Once the struts are removed, you can safely replace them with new struts.
Requires a hydraulic press to remove and install.
You will need to compress the strut spring with a spring compressor. When the strut spring is compressed remove the strut retaining bolts. There is a strut retaining bolt on the top and the bottom of the strut assembly. Reverse the process to install the new strut.
Begin by compressing the strut spring with a spring compressor. Remove the strut retaining bolts. Reverse the process to install the new strut.