Want this question answered?
Show removel of trunk lock 1993 chrysler lebaron
* Remove the trunk lid latch * Detach the lock release box from the latch assembly * To detach the lock cylinder from the trunk lid pry off the retainer
On the inside of your trunk lid locate the lockcylinder. There is a thin metal retainer which holds the cylinder in place, it has a small tab sticking out. Pull the retainer out and the cylinder will slide out .
what lock cylinder?door or ignition? door is simple, remove inner door panel, unhook rods attached to lock cylinder, remove retaining clip
Remove the retaining ring, from the top of your 1997 Ford Astro ignition lock cylinder. Remove the wiring harness from the back of the ignition lock cylinder.
Remove the retaining ring from the top of your 2000 Mercedes-Benz ignition lock cylinder. Slide the ignition lock cylinder out and remove the wiring harness.
You have to open the trunk lid, under the lock on the inside you will find a screw, remove the screw and the lock retaining clip, pull the lock out. If you can not open the trunk lid, drill the lock center out, and you should be able to open with a screw driver.
Sure. Can you open the lid? If so, there is only a clip that holds the lock in. Remove the lock, and with a small screwdriver, or pin, work what is left of the shank out of the cylinder of the lock, replace the lock, and you are back in business.
Remove the retaining ring at the top of your Chevy S 10 ignition lock cylinder. Slide the ignition lock cylinder out. Remove the wiring harness from the back of the ignition lock cylinder. Reverse the process to install the new ignition lock cylinder.
If you are talking about the ignition lock cylinder, the steering wheel must be removed and the column disassembled to access a lock screw which holds the ignition lock cylinder in the column. No key is required for this (unlike all other vehicle manufactures). If you are talking about the door lock cylinder, the door panel must be removed, and the lock cylinder retaining clip must be removed (again no key is needed, which is the same for all manufacturers). If you are talking about the trunk lock cylinder, it is easily accessible from inside the trunk. Those are the only types of lock cylinders in this type of vehicle. There is no specific lock cylinder named key lock cylinder.
Begin by removing the retaining ring at the top of your 1994 Ford ignition lock cylinder. The ignition lock cylinder will slide out. Remove the wiring harness from the end of the ignition lock cylinder. Reverse the process to install your new ignition lock cylinder.
With a Large Hammer