The procedure for replacing the bearings on a Chevy Venture is quite straightforward. Remove the inner drive seal protector first, then secure the rotor by placing a punch into the rotor vents and the brake caliper, and remove the hub nut and washer. After removing the brake caliper, a removal tool will be required to pull the hub free. Ample grease must be used on the hub, seals and the new bearings, and use 38 foot-pounds of torque to tighten the brake caliper, and 185 foot-pounds on the hub nut.
No.
Should be if undamaged.
Did you ever get anywhere on this thread? I'm looking to replace the front bearings and rotors on my 2000 ZR2.
Ask Watt
Front or rear bearings? 2 or 4 wheel drive? year of truck?
On a 98 venture the starter is located in front and just under radiator. Simple to reach and change. I learned the hard way.
you can't replace just the front wheel bearings, they are sealed so you have to replace the entire hub assemble and it will cost approximately $130 each side.
there is no lower intake gasket, only a front and rear gasket
How do you replace the front wheel bearings on a nissan frontier 4x4 1999
how do you replace rear wheel bearings on nissan pulsar
Wheel bearings? 4X4 ? 4X2?
When you can hear them, usually.