Should be if undamaged.
No.
the are supposed to be behind the front bumper
my heater fan in front of my 2004 chevy venture van wont work
The air bag module on 2002 Chevy venture is located between the driver side front seat and the passenger side front seat under the carpet
The correct tire pressure for a 2000 Chevy Venture is 32 psi front and rear. This is for the original tire sizes of P215/70R15 front, and P225/60R16 rear.
bolt torques for front callipers slide and mounting
The procedure for replacing the bearings on a Chevy Venture is quite straightforward. Remove the inner drive seal protector first, then secure the rotor by placing a punch into the rotor vents and the brake caliper, and remove the hub nut and washer. After removing the brake caliper, a removal tool will be required to pull the hub free. Ample grease must be used on the hub, seals and the new bearings, and use 38 foot-pounds of torque to tighten the brake caliper, and 185 foot-pounds on the hub nut.
Need to check left and right front wheel bearings.
Did you ever get anywhere on this thread? I'm looking to replace the front bearings and rotors on my 2000 ZR2.
bearings
If you are referring to the front bearings, you have to buy a complete hub assembly.
It is on the front of the motor, it will be the bottom most pully.