Remove the caliper and the rotor just comes off. Might have to us a hammer and bang it a few times.
Yeah my 1991 Ford Tempo does the same thing it starts and idles no problem but if i stop at a gas station and leave it running and come back out to the car i put it in reverse or drive it dies every once in a while
Something might be wrong. Have the code read to see the problem.
remove the brake caliper and the rotors come right off
A Ford Tempo will have no brake lights if the bulb has blown or the wires have come loose. Alternatively, the brake sensor in the dash can fail and stop sending power to the lights.
with a 5 lb hammer. It will come loose.
Take of the calipers and they come right off.
Possibly, take to a shop and get it checked.
Have a 1990 Ford Tempo GL, The car dies when you put it into reverse or you come to a stop. have replaced plugs, wires, Idol sensor, and cleaned the injectors. Its still doing it. Have a 1990 Ford Tempo GL, The car dies when you put it into reverse or you come to a stop. have replaced plugs, wires, Idol sensor, and cleaned the injectors. Its still doing it.
you ain't got no gas in it.
Tap on the rotors with a hammer, after removing the tire and wheel and the brake assembly. The rotors will come loose. Slide the rotors off and reverse the process.
Some do ;just ask your parts supplier to pull the rotor out of the box and check for you.
No. Brake rotors don't have bearings, the wheel hub does.