How to set clock on a 1992 oldsmobile achieva
The timing is computer controled and not setable.
How do you set the clock in a 1999 Oldsmobile Alero? I did not receive a book with the car and I really would like to have the right time in my car.
ever figure it out? i need to know
The water pump on an achieva is a difficult task, however, i done it. you should really get a book for the car, i recommend haynes, it is really helpful. the water pump is below the exhaust manifold and behind the timing chain. both will have to come off. Make sure when you put it back together you set the timing chain tensioner so it will stay in time and you wont bend any valves, which, bending them is extremely easy to do when your out of time. hope i helped some i have a 96 Oldsmobile achieva sc v6 and to change the water pump was fairly easy you just detach drive belt remove 4 small bolts to detach pulley from water pump the pump itself is then expose remove bolts change pump replace bolts then pulley takes about 20mins hardest part was bracing the pump pulley to break bolts loose
You could do things like WD40, But I suggest you get another set from A dealer or salvage, The system used to make A seatbelt work is very fragile. Jamison.
The set has changed many time since that date
As Time Goes By - 1992 Avoiding the Country Set 5-4 is rated/received certificates of: UK:PG (video rating) (2005)
With the radio turned off, you press the SET key, then using the Volume and Tune buttons, you set the time. Once set, press the set button, and your done.
With the ignition in the ON position and the radio turned off, press the SET button. You will have 5 seconds to adjust the time using the SCAN and SEEK buttons.
to find your tensioner pulley just follow belt rout the tensioner is always the smallest pulley and the bracket its on look plastic.now if you have a pump that has a belt around it and the crank shaft pulley only then you need to check the pump set up itself sometime parts are set up that you have to loosen bolts to take tension off belts
Turn the ignion on, turn radio off. Press the "Set" button. Use the "seek" and "scan" buttons to set the time.
What is the set timing of a 1992 Mitsubishi Expo?