0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How does sprinkler irrigation work?
Applying the water in the form of spray some what as in the ordinary rain, as it is done in the garden lawn sprinkling. The greatest advantage of sprinkler is its adaptabilities to use under condition where surface irrigation methods are not efficient.
Is a lawn sprinkler a Compound Machine?
Yes. The lawn sprinkler has a lever and a screw.
How do sprinkler irrigation systems work?
Sprinkler irrigation systems irrigate (water) crops/plants. If it is automated with a timer, sprinkler irrigation systems can be turned on and off at different times of the day. Places you'd find automated sprinklers: Parks, golf courses, landscapes, etc. Sprinkler irrigation systems can also be found on farms in several different formats, including pivot systems, pipes laid through fields (hand-lines), and wheel-lines.
What the function of the tamper switch in a fire sprinkler system?
In occupancies required to be equipped with a fire alarm system, theback-flowpreventer valves shall be electrically supervised by a tamper switch installed in accordance with NFPA 72 and separately annunciated.
How does a bicycle tube valve work?
Bicycle tube valves are one-way valves. They let air pass one way, then holds it in.
Are there valves in fire sprinkler systems in condos?
Yes, both wet and dry systems have valves.
How are timers set up in a sprinkler system?
Sprinkler systems can use many components that control the flow of the water. A plastic piping connects the water supply to the electric valves and the sprinkler.
Orbit Sprinkler Valve?
form_title= Orbit Sprinkler Valve form_header= Keep your lawn healthy with a sprinkler. Do you need to replace a sprinkler valve?*= () Yes () No How many valves do you need?*= {1, 2, 3, 4, 5, More than 5} How old is your current sprinkler?*= _ [50]
Are anti siphon valves required on sprinkler systems in Oklahoma city 73179?
yes
What does deluge mean in a fire sprinkler system?
A deluge fire sprinkler system, unlike most ordinary systems, mean that the sprinkler heads do not have individual heat-sensitive valves. The sprinkler heads in a deluge system have no valves of their own, meaning they are always open and water will be sprayed out of them when the supply valve is turned on. There are limited uses for deluge systems, such as in a tire storage warehouse where it is important to put out a fire quickly and the massive flow of water will not cause major damage.
What is a sprinkler manifold?
A sprinkler or "valve" manifold is the heart of a sprinkler system. The water source (hose faucet, sprinkler main line, etc.) feeds into the manifold and then the valves in the manifold redirect water to different watering areas. Its reason for being is that most water sources have insufficient pressure and flow to water all areas at the same time, so the manifold allows watering to be divided into smaller areas or "zones". A simple way to visualize a sprinkler manifold is as a small letter "m" in which the water source connects into the top of the "m" and then a valve in each of the legs opens and closes to allow water to flow to each zone. Valves in a sprinkler manifold may be controlled either manually or automatically using a sprinkler timer or "controller" which is the brains of an automatic sprinkler system.
What causes a knocking sound when you run your water sprinklers?
The quick opening and closing of valves (sprinkler heads) you need an air chamber
In my Sims kingdom Wii how do you make the sprinkler?
You do not need the sprinkler use the t pipe to drop water on the plant and using that is easier than the sprinkler since it does not work Your welcome
How do you design a sprinkler system?
The following steps are the keys to a good irrigation sprinkler design: 1. Identify water source for system; confirm pressure and flow 2. Confirm backflow prevention and any other code requirements 3. Determine what areas you want to water and how (see types of irrigation sprinklers) 4. Plot sprinklers for each area based on overlapping (head to head) coverage 5. Divide areas into zones of sprinklers based on max water flow 6. Specify type and location of control valves for each zone (see types of irrigation control valves) 7. Calculate the pipe size and quantity required to connect water source to valves to sprinklers 8. Determine type and location of sprinkler timer/controller (see types of irrigation sprinkler timers) 9. Calculate the wire quantity required to connect timer to valves Various tutorials and sprinkler design services are available on the Internet under search terms like "sprinkler system designer".
How does a sprinkler system work?
A sprinkler system works by pushing water through a hose or underground water pipes and releasing the water through a sprinkler nozzle. These can be used manually or automatically through electronic systems.
How does sprinkler systems work?
A sprinkler system works by pushing water through a hose or underground water pipes and releasing the water through a sprinkler nozzle. These can be used manually or automatically through electronic systems.
Where is theTamper in Sprinkler system?
The Tamper switches for a fire sprinkler system are located on the main control valves which are located on either side of the backflow preventer for a wet type automatic fire sprinkler system. These switches are wired into the monitoring control system/alarm panel to ensure the valves remain open at all times (or not tampered with.) If the tamper switches are used they will show a supervisory trouble on the panel so the monitoring company or business will know there system is out of service.
