0
How do thread a bobbin on a singer golden touch and sew model 620?
Wiki User
∙ 11y ago
The bobbin is wound in the bobbin case. You open up the slide plate and push the little lever with the bull's eye on it all the way to the left. Then you thread the needle with the thread you want on the bobbin, then pull a few inches and wrap the needle thread around the knurled knob that holds the foot onto the shaft (to keep it from slipping.) Then you push down on the foot pedal and the bobbin fills from the needle thread. Don't overfill the bobbin or it won't wind out properly.
Wiki User
∙ 12y ago
Wiki User
∙ 11y agoDrop your bobbin in the bobbin case and push the small button to the right of the case and the bobbin will wind automatically. If it does not wind automatically then your machine needs service.
Add your answer:
Earn +20 pts
What is the purpose of a bobbin in a sewing machine?
A bobbin winder is the part of a sewing machine that takes the thread from a spool of thread and winds it on the bobbin. The sewing machine bobbin is a mini-spool of thread, made of plastic or metal, that holds the thread that will be on the underneath portion of your fabric when you sew. The top thread comes from the spool of thread and the thread on the bottom side of your fabric comes from the bobbin. Instead of winding the thread on the bobbin by hand, long and tedious, the machine will wind it for you if you load it up correctly. Check your owner's manual for instructions. If you don't have a manual, do a google search for it by entering the name of your machine branch and the model # and it will probably find one. Also, any experienced sewer can show you how.
Why is the bobbin thread of a Euro-pro model 420 tangling all up?
I don't have the answer, but my 420 does this all the time. I know it is a bobbin problem, but cannot figure it out. I reinsert the whole bobbin contraction over and over. I'm thinking of this useless machine myself!
How do you thread a bottom bobbin of a singer imperial?
The free MANUAL for model 4552 (aka Merritt 4552SW) at the singerco website tells you the answer in it's 44-page manual. The Internet link is listed further down this page under Sources and Related Links.
What model singer sewing machine is this?
I got a singer model 188k1 and it is not sewing good .The bottom thread is bunching up instead of looping the way it should.what should I look at to see what could be loose or worn etc.?
How old is a singer model 9420 sewing machine and is it a very good machine to start sewing with?
My mom bought hers 15+ years ago. As for starting not sure my moms has had problems with the thread knotting near the bobbin. This is very frustrating to a new sewer (I was a new sewer). How ever if you can run a stitch through and stop and start on a new line your machine may not have any problems.
How do you thread an Elna 1500 sewing machine?
First, raise the presser foot lever and turn the flywheel towards you to raise the thread take-up lever to its highest point. Next,, place your spool of thread on the horizontal post and hold in place with the spool cap. You know that little nick in the spool where you tuck your thread so the spool won't unravel? Make sure that nick is pointing to the right. Now draw your thread to the left and "click" it into the little silver loop. A 1" oval thread guide sits to the left of that silver loop; draw your thread around the left of the thread guide. Now you're going to loop your thread through the tension discs. You'll see two "cracks" in your machine. First run your thread DOWN through the RIGHT crack, then immediately UP through the LEFT crack. At the top of the LEFT crack is your silver thread take-up lever. This is probably the trickiest part of threading your machine because the lever is always kind of inside the machine. But you can do it! Pass your thread from RIGHT to LEFT through the back of the loop at the top of the silver lever. Whew! We're almost there. Now draw your thread right back down the same crack you pulled it up before. You now have two stationary guides above your needle. Pass it through the thick silver guide and then through the thin silver guide. Both of these moves are kind of a left-to-right motion. Now thread your needle from FRONT to BACK. You're done -- well, except for the bobbin. Hold your bobbin spool above the bobbin case so that it looks like a letter "P" Draw the bobblin thread from RIGHT to LEFT through the small crack in the silver part of the bobbin case, then pull the thread straight toward the back of the machine. Now turn your flywheel one revolution toward you so that your upper thread picks up the bobbin thread. Now close your bobbin cover, and SEW! Congratulations! You did it!
What is the Winchester model 90 barrel thread size?
What is the thread size for a Winchester Model 90?
What size bobbin is used for Kenmore 385 16524000?
It depends on the model of the machine. If the bobbin is a top loading drop in bobbin, it's probably a class 66 bobbin. If the bobbin case is down below on the front of the machine, and you take it out to remove the bobbin, it's usually a class 15 bobbin. If you have your manual, it should tell you what bobbin you need. If you don't have your manual, go to managemylife.com, enter your model number. and you should be able to download your manual. On the newer kenmores, the model number is on a plate on the back of the machine, and will start with 385. and continue on. You need to enter the complete number. Bekhat
What size bobbin do you use for Kenmore sewing machine model 1941?
Have the instruction book but does not mention so I have the machine and I would say same size as the singer but are metal OK ( bobbin ) Most Kenmore sewing machines (including this one) take class 15 bobbins which you can find at Joann's, Walmart, and most places that deal in sewing machines. They come in either plastic or metal.
Any sewing machines that don't need a boben?
The Sears Kenmore Model # 385.8108 is a bobbin less model available for around $220.00 US.
Is gillian bennett a model or singer?
No, she is neither a model nor a singer.
How do you thread an old Singer sewing machine year 1948 serial number beginning JC?
Go to singer.com and search there on how to use your serial number to find out your machine's model. They made many models and most of the older ones didn't thread the same way. If you know your model number go to sewusa.com and check out their free threading diagrams.
