Want this question answered?
5W20 Synthetic, Type f Synthetic trans fluid, or the recommended Polaris premium demand drive fluid.
calculating sprocket RPM is very easy if you know what the RPM of the drive sprocket is. If you know that then it is a simple fraction problem. If you make the drive gear the numerator or the top part of the fraction and the driven gear the denominator or the bottom part of the fraction (DRIVE/DRIVEN) I.E. if the drive sprocket has 25 teeth and your driven sprocket has 100 teeth (25/100) that will reduce to (1/4) or a 4:1 ratio. So if your drive sprocket is spinning at 1000 RPM then your driven sprocket will be spinning at 250 RPM. You can plug your specific sprocket tooth count into that equation and come up with the right answer.
If the drive sprocket is worn out on your chainsaw, the chain will not turn. This is the biggest indicator that it needs repair.
remove bar, chain there should be a small cover over the drive sprocket, held on woth a screw, remove cover, then there should be a screw or bolt holding the sprocket on, remove that, pull old sprocket off, replace it in reverse.
No, it is not legal to drive a Polaris Razor 1000 anywhere in the state of Texas.
14 and up
How to put chain sprocket on bobcat
polaris has its own type of transmission fluid. it is called "polaris demand drive fluid" and is available from any polaris dealer
14 and up
Shaft, belt or chain & sprocket
no you can not 25 with 8
whwen you changed the srocket is there a taper on the sprocket if there is its on wrong or did you forget to adjust the guide drive safe