try this:
Synchronizing Transmitters
Press the LOCK and UNLOCK buttons on the transmitter simultaneously for 7 seconds.
The horn will chirp once when the transmitter is synchronized.
Or this:
Programming Transmitters
Turn the ignition to ON.
Turn the radio to OFF.
Press the RESET button in order to clear any IPC warning messages.
Press and release the OPTIONS button on the DIC to scroll through the display options until the IPC display is blank.
Press and hold the RESET button for 3 seconds.
Press the OPTIONS button until FOB TRAINING message is displayed.
Press the RESET button in order to begin the programming sequence. The message HOLD LK + UNLK 1ST FOB will be displayed.
Simultaneously press and hold the LOCK and UNLOCK buttons on the first transmitter for 15 seconds. The IPC will indicate when that transmitter is programmed and when to proceed to the next. Repeat this procedure for each additional transmitter or press the OPTIONS button to exit.
If neither one of these procedures works it might be time to see a dealer. try this:
Synchronizing Transmitters
Press the LOCK and UNLOCK buttons on the transmitter simultaneously for 7 seconds.
The horn will chirp once when the transmitter is synchronized.
Or this:
Programming Transmitters
Turn the ignition to ON.
Turn the radio to OFF.
Press the RESET button in order to clear any IPC warning messages.
Press and release the OPTIONS button on the DIC to scroll through the display options until the IPC display is blank.
Press and hold the RESET button for 3 seconds.
Press the OPTIONS button until FOB TRAINING message is displayed.
Press the RESET button in order to begin the programming sequence. The message HOLD LK + UNLK 1ST FOB will be displayed.
Simultaneously press and hold the LOCK and UNLOCK buttons on the first transmitter for 15 seconds. The IPC will indicate when that transmitter is programmed and when to proceed to the next. Repeat this procedure for each additional transmitter or press the OPTIONS button to exit.
If neither one of these procedures works it might be time to see a dealer.
Hold the lock and unlock buttons simultaneously for 7 to 10 seconds. The locking mechanism on your car should activate and your remote should be synchronized. Just did this on my 2003 Tahoe. You definitely do have to resynchronize our keyless entry remote after changing the battery. The car manual clearly states that you need to (although it doesn't say how).
you have to resync the remote after changing the battery, stand next to car hold the lock and unlock buttons down for about 7 seconds or until you hear the horn chirp, thats it good luckSource(s):Impala LS owner
resync to network time server.
Go to itunes and resync it,
you dont unless you resync it to the backup
No you do not.
On the wii remote sync screen press 1and 2 simultaneously to use it as a guest remote. If you'd rather it was synced to the wii instead of the WiiU, you can resync it using the sync buttons. You can always resync a remote to either console if you want.
I've had this problem too, but i realized you need t go to iTunes and resync your pod.
Resync your remoteWe have a '99, so it should be similar. According to the manual, page 2-12:Resynchronizing the Remote Transmitter... Press the LOCK and UNLOCK buttons, together, and hold for at least seven seconds or until the horn sounds if equipped with Content Theft Deterrent.is it a different procedure with 1999 intrigues? i just tried syncing both of my remotes with new batteries and had no luck at all.
Delete the song the one that doesnt work on where you got it from, and resync it again or wait for three days and see if it works.
how do you undo your tagged photo which I erase
You can get games from the itunes store and they download into your itunes. All you have to do then is resync it, making sure that all games is selcted in "games" on your ipod menu in itunes.If you can't sync it then just drag it onto your ipod in the itunes menu.