please be more specific. what year, what model?
schematics for wiring harness 2001 soft tail motorcycle
for wire harness maintenance
Harley Davidson decals can be removed from metal using metal wire or fishing line. Move the wire back and forth under the decal until it comes loose and can be pulled off.
wring on a 1992 sporters speedo
Run a toggle switch from battery to ign. side of ign. switch.
you put the ground wire in ur head, and the red one on a battery
flash the armature or "A" post of the generator to the positive terminal of the battery using a peice of wire.
There an ignition light spark plug wire and you can find them for sale from J&P Cycles online or call them 1-800. also you can find them from many harley Davidson dealer ships
A cable harness, also known as a wire harness, cable assembly, wiring assembly or wiring loom, is a string of cables and/or wires which transmit informational signals or operating currents (energy).
a wire goes from the a terminal from generator to the g on reg.the f from gen goes to f on reg .one wire from positive batt to b on reg.
Bad coil (cracked across terminals) bad wire (cracked, split)
check and see if you have cut or pinched the wire harness going into the switch housing on the throttle side... i pinched mine and lost brake, turn lights,,, still had tail lights in the turn signals but that is because i was using a brake/turn controller on the rear lights...
I would check the wire connections under the right side tank. I know on my 78 FLH I had that issue and it was the wire on the wiring block that was bad.