Unless you have the frequencies of the chip inside the key or very tech savvy knowledge of how to trick the computer that runs the ignition into thinking it has the correct key chip inserted, you don't. Extra chip keys are about $150.00 a piece... IF you have the original key. I don't know what the price is to re-key a Windstar ignition switch that requires a chip to start, but it isn't going to be in the neighborhood of 'cheap'.
i dont know whwere is the tachometer wire of 2001 ford windstar
A haynes manual will have that. Find at your local auto parts store.
The ignition wire for the 2001 Ford Ranger is yellow. This is the 12 volt constant wire. Other wires in the harness are red and blue.
show diagram for firing order for a 1996 ford windstar 3.8 engine
hot wire it
where is the wire for theft system 2000 ford ranger to bypass
The AIT sensor on a Ford Focus SE 2001 in insdide the mas air flow sensor.The brown and whit wire and the white and violet wire.
well if the 2001 is in the same generation as the 98-2000, then the wire is gray with a black stripe and can be found in the harness that goes to the fuse box under the hood.
broken ground wire on sender
Actually , it doesn't have one The 3.0 L and 3.8 L - V6 engines in the 2000 Ford Windstar are EDIS ( Electronic Distributorless Ignition System ) and have a rectangular shaped COIL PACK ( Just follow a spark plug wire from a spark plug , the other end plugs into the coil pack )
Check around the reservior for a wire harness going to there. Try tapping on it.
Check:That all wire connections are tightConfirm the firing order sequence is correctSee "Related Questions" below for more