That depends on the routers make, model and possibly firmware level. You may be referring to a configured router, you will need to log into your router to find it. Please consult the manufacturers webste to obtain specific information
Your router can be configured by accessing its (usually) web based configuration. After connecting it to your network card, type in the address given to you by the manufacturer (usually - 192.168.0.1 or 10.0.0.1) with the username and password provided. From here you should be able to setup you security settings.
by typing its ip address if you have a linksys router this its default ip 192.168.1.245 thank you and enjoy
Normally you open your internet browser and type in either 192.168.2.1, 192.168.1.1 or 192.168.0.1
A wireless router, is a device that not only performs the functions of a router but also acts as a wireless access point. Wireless clients connect to the wireless router to access a common network, the router also often provides access to the internet.
You might choose option do not allow edit settings through wireless. If you have the password you have a choices to connect to the router directly using a lan cable and change your settings. If it didn't work just reset the router settings which is the worst scenario but you don't have much of choice. Each router has a reset button, read the manual to find out how to reset your router.
A wireless router is a device that performs the functions of a router but also includes the functions of a wireless access point and a network switch.In essence, it allows you to connect to the router without an Ethernet cable and have access to the internet.
The primary thing that happens when you reset your router is that it does back to default settings. This means that the network and wireless settings will need to be reconfigured.
The main equipment you need to set up laptop wireless internet access is a functioning wireless adapter and a router connecting to the internet. You also need to be in signal range of the router.
A wireless router, is a device that not only performs the functions of a router but also acts as a wireless access point. Wireless clients connect to the wireless router to access a common network, the router also often provides access to the internet.
If its your router then you should have it. If you dont, you are going to have to login into the router and reset the WEP settings. If you have lost your router password aswell you will just have to reset the router and start from scratch.
Check with the router manufacturer. But you should be able to access your wireless settings by entering your routers IP address in the web browser. In the future, try installing the software it came with or download it from the manufacturers website.
Is there any computer online using the router. If not then you will need to connect the computer to the router. If yes then you can open the router set up page on that computer. router set up page is the page where you can check all the router settings. Try this web site: fixhomenetwork.com
That depends on what you are attempting to do. If you are trying to access the internet, then no, a wireless router is not needed.
A Wireless G router provides Wireless access to 802.11g compatible devices
Yes, at least one router per access point.
how far are you able to access your wireless
You might choose option do not allow edit settings through wireless. If you have the password you have a choices to connect to the router directly using a lan cable and change your settings. If it didn't work just reset the router settings which is the worst scenario but you don't have much of choice. Each router has a reset button, read the manual to find out how to reset your router.
Go into your wireless router settings page
No. You can not attach a router and use a standard Verizon Wireless aircard as a wireless access point. This is why they have MiFi which is essentially a wireless access point.
To get Wi-Fi, you must be near a wireless router. Then, go to settings, and then to Wi-Fi. Tap on the router you wish to access (and enter a password or WEP key if necessary). The iPod will connect to the router and you now have Wi-Fi access from the range of the router.