0
How do you access the side marker light on a Lexus RX 300 to replace the bulb and do you have to remove the bumper?
Wiki User
∙ 17y ago
It's actually not as difficult as it seems. Look in the fender liner area (where the wheel wheel is) and you will see the screws that hold the liner in place. Once you remove the bottom screws (or be it the screws that hold the edges of the fender liner), you can carefully pull it back a bit to expose the bulb and socket. To remove the socket turn it counter clockwise until you can pull it out. To reinstall the socket turn it clockwise until it locks in place Carefully remove the bulb from the socket and replace with same type. To remove the bulb pull it straight out. Push the new bulb straight in. The bulb is a 194 5w bulb. Note: most of the time the reason the bulbs are burning out in the bumper is due to water getting in behind the lens and not being able to drain. What I have done is use a Dremmel tool to carfully drill a very small hole along the bottom of the lens to allow the water to drain. Another option is if you have clear silicone you can suirt some around the outside of the lens. This will prevent water from getting in. However, if there is already water in the lens you will have to drain the water first. To drain the water use a ratchet wrench and unscrew the nut that holds the lens to the bumper. In severe cases of corroded sockets you might have to replace the socket where the bulb goes into.
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
How do you replace side marker bulb on Xterra?
On my 2002 Nissan Xterra I had to remove 4 screws from the front bumper and wheel well and then I was able to get to the back side of the side marker light and remove the nut in order to get to the light bulb.
How do you replace side marker light Xterra?
On my 2002 Nissan Xterra I had to remove 4 screws from the front bumper and wheel well and then I was able to get to the back side of the side marker light and remove the nut in order to get to the light bulb.
How do you replace a 99 Pathfinder front bumper?
remove bumper, replace with new one.....easy huh ?
How do you remove rear bumper jaguar x-type?
how do you remove and replace rear bumper on an xtype jag
How do you replace rear bumper 1992 300e?
First, remove the nut from the middle of the bumper, and then remove the nut from the the mounts at each rail frame. Then remove the nut or screw holding the bumper to the car at the area of the wheel. Remove the old bumper, put on the new bumper, and replace the screws in nuts in the reverse order.Ê
What do you need to replace the rear bumper on 1988 Toyota Camry?
There should be 2 access plugs on each side in the trunk. Remove the bolts and slide the bumper out. Maybe a foot in from each side.
How do mechanics replace the front parking sensors on a 2003 e-320 Mercedes Benz sport?
You have to remove the front bumper to gain access to sensors.
How do you replace marker light for 1993 Chevrolet s10 pickup truck?
Remove the socket containing the bulb from behind the bumper. Twist the socket 1/4 turn counterclockwise and pull the socket out.
How do you remove and replace the head lamp assembly in a 1992 Honda Accord?
first remove the bumper turn lights...two screws on one each light..then remove the lights carefully, so you do not break them.... After that...remove the bumper screws in the wheel wells.... Then, where you have removed the bumper lights...with a socket extension..and a 12 mm socket...remove two bolts on each bumper mounts.....then the bumper should come off in a forward direction.... you now have access to both headlight assemblys.
How do you replace a 1996 Chevy capric classic bumper?
Remove the bumper and put on a new one :)
How do you remove and replace 1991 Toyota MR2 radiator?
Remove the front bumper to remove the radiator
How do you remove the rear bumper on a 2004 Nissan Sentra?
To remove the rear bumper on the 2005 Nissan Sentra, you will first need to remove the rear bumper cover by using a flat tool to pry the pins. Then, access the bolts holding the bumper to the frame of the vehicle and remove the nuts. The bumper will then lift off.
