Add the 50 / 50 mix of antifreeze and preferably distilled water to the engine coolant reservoir on the drivers side of the engine compartment ( carefull you don't put coolant in the windshield washer fluid reservoir - they are side by side ) or , if the engine is completely cool , you can remove the radiator cap and add directly to the radiator , and then re-install the radiator cap
to the road
A 1992 Ford Explorer was not designed to have third row seating The first model year that third row seating was available was the 2002
To the power steering pump located on the driver's side of the engine.
Where do I add transmission fluid to a 1994 Ford explorer with a manual transmission?
On a 1992 Ford Explorer : The engine oil is added through the extension tube on the passenger side engine valve cover ( near the front of the valve cover , near the top radiator hose , the cap probably shows " engine oil " or " oil " )
Ask answers.com
A 1999 Ford Explorer is not designed to have a third row seat . The third row seat was available starting with the 2002 Ford Explorer four door model
2005 ford explorer's do not have a dipstick, the transmission is sealed and needs to be done by a dealer unless you are prepared to do a lot of work
4
90w ======================================================== According to the 1996 Ford Explorer Owner Guide ( 80W90 ) for the REAR differential * if you have a Ford Traction-Lok add 4 ounces of friction modifier
It's not designed to have a third row seat , that wasn't available until the 2002 four door Ford Explorer
yes y not you can add a new one just wire it to the bat and fuse it