0
Sportster -
Aim the beam by loosening the headlamp mounting nut and position the lamp to correctly adjust the beam of light in relation to the horizontal line. At the same time, turn the headlamp right or left to direct the beam straight ahead. Tighten the clamp nut after the lamp is correctly adjusted and install remaining fork parts.
Electra Glide, Duo-Glide and Servi-Car -
The lamp can be tilted up or down to aim it in relation to the horizontal line by turning vertical adjusting screw in or out. The lamp can be aimed to the right or leftt in relation to the front wheel by turning the horizontal adjustment screw in or out.
Owners manual suggests:
Seat a rider (to simulate riding conditions) then measure the exact height of the beam. Draw a horizontal line on the garage wall or screen and position the motorcycle on a level surface with headlamp approximately 25 ft. away from the test pattern. Turn on the high beam and check beam for height and direction. The top of the main beam of light should register even with, but no higher than the horizontal line of the test pattern.
Be certain that tires are properly inflated!
... and never fly faster than your guardian angel !!!
69 Sports
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the difference between a harley Davidson softail heritage classic and a harley Davidson softail heritage?
heritage classic or heritage softail classic is the same..only bike different is the heritage springer which has the springs on the front under headlamp
Where can someone purchase a front fender for a Harley Davidson?
Front fenders for Harley Davidsons, as well as other parts, can be bought directly from Harley Davidson dealers or from from Harley Davidson's website. You can also find them on major online retailers like Amazon or eBay.
Where can Harley front end components and accessories be purchased?
Harley front end components and accessories can be purchased from online websites such as harley-davidson and phatperformanceparts. They both sell many different components and parts for Harley-davidson bikes.
What kind of motorcycle is the Harley Davidson Springer?
The Harley Davidson Springer is a softail motorcycle that has a springer front end. The springer has an extra spring loaded shaft that helps for the front wheel's suspension.
What year did Harley Davidson start using front brakes?
1928
Where is the VIN on a Harley Davidson motorcycle?
stamped on the front down tube.
What is the diameter of the front axle on a 2005 harley Davidson?
It should be one inch.
Where could one find front end parts for a Harley Davidson motorcycle?
You can purchase front end parts for a harley davidson motorcycle from their official website's store. Alternatively you could purchase them online from the salvagebikesauction website.
What is the outside diameter of front fork tubes for a 1998 fxd harley davidson?
41mm
When did harley Davidson start using hydraulic brakes?
1958 for the rear and 1972 for the front.
Oil filter location harley Davidson sportster 1200?
The oil filter is located in front of the front cylinder
What is the correct tire pressures front and rear for a 1978 Harley Davidson superglide?
24lbsin the front 28lbs in the rear
