Loosen the locknuts on the front and back tensioners and back off the bolts, start engine and let it idle for a while. Tighten the bolts, just snug them up, and re-tighten the locknuts.
Quoted at 95hp @9000rpm.
The Honda CB 900 F is a classic motorcycle. It is not old enough or special enough to be classified as vintage.
I have a 1982 v45 magna and the timing chain is loose can it be adjusted thanks
I like the web sight and hope it can help.
On my 1980 Honda CB650 there is a small knob on the right hand side (when you are sitting on the bike) should be under the fuel tank. Turn it in for higher idle and out for lower idle.
To adjust the primary chain you remove the oval-shaped inspection cover on the chaincase, loosen (don't remove) the 9/16" nut that holds the chain tensioner in place and move the adjuster up or down to adjust chain tension. The chain should have 5/8" to 7/8" of up-and-down play at its tightest point when the motor's cold and 3/8" to 5/8" of play when the motor's hot. To adjust the rear chain, loosen (but don't remove) the axle nut and turn the adjuster nuts (on the ends of the swingarm) in or out an equal number of turns to obtain proper chain tension. The rear chain should have about 1/2" of up-and-down play at its tightest point.
1982 Toyota PU timing belt or chain
A Honda 1982 Honda xr500r goes about 85 mph.
Earls - restaurant chain - was created in 1982.
The dry weight of a 1982 model, 7.5 hp Honda outboard is 77 lbs.
How much engine oil does a 1982 Honda Nighthawk 650 take? 3.4 quarts
Clymer 1982 - 1988 Honda V45 & V65 Magna/Sabre repair manual has 0.031 - 0.035 in.