Jack the car up. Remove the plastic cover from underneath. Access the underneath of the car via the passenger side. The Power Steering Pump is the first one on that side at the bottom. Use a 14mm Socket to loosen the bolt securing the Power Steering Pump at the bottom (bolt is situated just above the universal joint on one of the shafts). Look up above the Pump at the front and you will see a 14mm Bolt pointing downwards. This bolt tensions the Pump. Firstly using a 12mm Socket undo the bolt part way up on the side which secures the clamp. Then using the 14mm socket adjust the bolt pointing downwards until the belt is at the correct tension. Then do up the 12mm and the rear 14mm bolt. Job done :o)
The Nissan largo top up point is just to the left of the gear stick. You will have to remove the central console to do this.
you have to take the central console (between the front seats) out. under there is the well for power steering fluid.
Nissan Largo 1996
No, but a Nissan dealer may have one. Failing that try the Nissan website.
Could you please tell me the fuel consumption for the nissan largo, (Japanese import) both the 2.0ltr diesel and the 2.4ltr petrol . Thank you
by turning it on !
cambelt
in a plastic tube in the engine that leads to the sump.
The oil pressure switch is located next to the engine.
what are cylinder head torque settings for a 2 tdi Nissan largo
You can use any SAE certified engine oil in your Nissan. The engine oil should be a 10W-30 weight engine oil.
25 mpg urban 38 at 56 mph