Want this question answered?
Shift point setting may not properly set at the right pressure.This is controlled by the TV or shift cable. If you look where the air butterfly plate is under the hood, or air control, the 2nd cable attached next to the throttle cable on the side is the TV cable. There is a metal tab that can be pushed in to release the cable housing to adjust the transmission shift points. It only takes a couple of clicks at a time to make a difference in your shift pattern, so go a little at a time.
The 1997 Chrysler Sebring parking brake cable has adjustment nuts on each end of the cable. Adjusting the nuts will lengthen or shorten the parking brake cable.
adjust the clutch
It is a 4L60E
You can't adjust the TPS, but there is a way to adjust the idle if thats what you want. Right next to the brake master is the throttle cable and with your fingers spin the black plastic nut on the cable to desired rpm.
shifter control cable is probably come off @ linkage
5W30
255hp
There is a small O-RING that fits over the shaft that the safety switch slides over. It is called a shift shaft seal.
i cannot shift from 3 to reverse my cable line for the shifting is disconnected and don't know where it suppose to go
in between the grill and the Radiator
The 1997 Ford Taurus shifting cable has adjustment swivel nuts on each end of the cable. You can turn the swivel nuts to lengthen or shorten the shifting cable.