answersLogoWhite

0


Best Answer

The adjuster is located in the engine compartment on top of the gearbox assembly. It is easier to see with the airbox removed but can also be accessed with it in place. You will see the clutch release arm and the cable attached to it. Slacken off the 10mm locknut at the end of the cable and by pulling on the end of the cable the plasitic portion of the adjuster will move away from the release arm. The plastic piece is also threaded onto the cable and by screwing in or out will adjust the freeplay between the release bearing and the cover plate. It should be adjusted so that both the clutch pedal and the brake pedal are about the same height when viewed in the car.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you adjust the clutch cable on a Matiz 800 SE 02 reg?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How much does a Daewoo matiz weight?

about 800 Kg.


How much fuel does a matiz daewoo consume?

i have owned a matiz 800 cc for a few months , i get around 40 mpg in buzy town traffic and 55 - 60 on long runs i love my matiz it seems to run forever on £10 of petrol


How much for a tayota Celica clutch?

I live in Kansas City and paid about $800 for a new clutch, installed, on my 1990 Celica GTS.


What is the torque settings for big end and mains on bearings for 800 cc matiz?

the big end bearings torque down at 55 - 65 Nm


What channel is BBC one?

freeview 1, cable 101, if you are in Wales and want English bbc1, 800


How much labor to replace a clutch on a 1996 Pontiac sunfire?

The labor to replace a clutch on a 1996 Pontiac Sunfire can range from $670 to $850, depending on where you go. This does not include the cost of the clutch itself, which is roughly $800.


If something is wrong with clutch in a Geo Prizm and it won't go into gear while on and it turns off in reverse what are ballpark clutch repair costs?

it depends on what kind of cluch you want to go with,at a Chevy dealership you can get a Toyota clutch or a chevey clutch. I had to put in a new clutch in my 96 prism and it was a Toyota and it costed me about 800


How to you adjust the idle speed?

How to adjust the idle speed If you have a carburetor, there is a crew on the driver side behind the throttle cable it usually has a spring on it if you turn it to the right it idles up left it idles down If its a fuel injected motor idle is handled by the computer. There usually is a "base idle speed" around 800-1000 RPM. This normally doesn't need to be adjusted. Have a look for carbon build up on the butterfly as well, this will influence idle too. u can also adjust the cable there's two nuts that hold the the cable to the injection adjust one way to lower and the other way to raise Also: check & tighten all hoses as even slightly leaking hoses raise & lower ur idle speed.


Where can one find a firewire 400 to 800 adapter cable?

You can buy a firewire 400 to 800 adapter cable from any good computer shop on the high street. You can also go online to eBay and Amazon to buy this item.


Where can you purchase firewire 800 cable?

If one is interested in purchasing a firewire 800 cable it is recommended to check out popular stores that carry these type of items like Best Buy or Wal Mart. These stores typically have these in stock, but if they don't, it is recommended to purchase it off of Amazon.


How much to replace a clutch on a 1996 Saturn?

It depends on where you live and where you get it done at. I payed $1,200 for a used transmission and clutch replacment the first time at about 120,000 miles, and $800 when i put in the second clutch at about 160,000 miles. I found out on the second clutch that downshifting to slow the car down is NOT a good idea, because the clutch fins are so thin on Saturns. Mine was a 94 SL2, sure do miss it....


How do you adjust timing chain on a suzuki intruder 800?

The timing chain on an Intruder 800 should adjust itself. If this isn't happening, I think you MAY be able to access the adjuster by taking the valve/rocker cover off and seeing if the tensioner is up to full stretch or is not working. If it won't adjust any further and take anymore play out of the chain, it's possible that your chain has stretched over time and needs replacing.