1st make sure that the service brakes are adjusted properly Adjustment should either be at the junction of the cables under the vehicle or at the handle itself (may have to remove trim for access) Set to 3 clicks and adjust so wheels are locked at this point
You can adjust your 1989 Chevy Corvette emergency brake into different ways. The emergency brake will have an adjustment bolt on the brake pad. The emergency brake cable can be adjusted to shorten or lengthen the cable.
The emergency brake cable is connected to the brake shoe on the rear brakes. You can adjust the emergency brake by loosening or tightening the nut on the end of the cable.
my brake light stay on but emergency brake is unhooked
In the center arm rest is a cover at the bottom that can be removed to expose the emergency brake cable, and a nut to adjust the tension.
If the cable aren't frozen. Adjust the rear brakes first. Then if possible, haven't looked at mine in awhile adjust the cables probably under the car
The 2005 Jeep Grand Cherokee emergency brake cable has adjustment nuts on each end of the cable. Turn the adjustment nut to lengthen or shorten the cable.
you must first adjust the rear drum brakes. then and only then can you adjust the cable for the parking brake at the base of the park brake pedal/handle. if you don't do the rear drums first, you will stretch the cable
http://wiki.answers.com/Q/Adjust_emergency_brake_cable_on_2002_GMC_yukon"
it is a self ajustment each time you put hand brake it is done
adjust the shoes
The emergency brake cable is held in place with swivel nuts on each end of the cable. Turn the swivel nuts to the left. The emergency brake cable will come off.
You have to take them all off from pedal to wheel and re-fit as a set, then adjust them.