Want this question answered?
On a 1992 Acura Vigor idle is adjusted through a idle control valve. Tightening the valve well raise the lower the idle and loosening it will raise it.
Idle speed is controled by the computer, therefore non adjustable.
The Honda B18b1 engine found the many Acura Integras use an idle control valve. Its idle control valve is placed on the intake manifold and uses a flat valve which can be screwed in and out to lower or raise the idle.
You don't, fix the vacuum leak that's causing the eratic idle conditions
You have two adjusting screws at the top of the dieselpump. And the outer screw is for idle if i dont remember wrong. but that you will notice when you adjust the screw.
the idle is set by the comp so u need some sort of programmer
You adjust idle with idle timing
Adjust idle on Mitsubishi diamante
there is a screw on the carb. be sure to adjust while the engine is running so you can tell by the idle when it is set properly.
how to adjust idle on 2001 legacy
There is an adjustment screw that sits against the "dashpot" and you turn it right (in) to lower the idle and left (out) to raise the rpms.
you can adjust it via the idle control valve.