you are screwed. light it on fire and crack a brewski
There's a screw with a spring behind it on the side of the carburetor. It's on the gear shift side of atv. Screw in for faster idle and out for slower.
how do u change the timing chain on a Yamaha timberwolf
its 80w 90 gear oil. i use synthetic and have had no problems on my 94 timberwolf
1997-1999
1992 thru 1999 then the 250 beartracker in 2000 basicaly same as timberwolf,
on the engine......stupid.
not quite, the Timberwolf was replaced with the Beartracker in 99 it has a 250 motor as well but a larger carb and longer stroke than the Timberwolfs motor and the bike itself is larger
The idle speed is computer controlled
If you are not able to adjust it down with the idle adjust knob you may have an airleak at the carb.
intake 0.05mm-0.09mm (0.002"-0.004") exhaust 0.11mm-0.15mm (0.004"-0.006")
It's stamped into a tag on both sides of the motor. Just below cylinder head.
It should be on the carb!
Turn it all the way in and then back out 1 1/2 turns