well i just had to do that this last summer. u pretty much have to take off ur head . wich means you will need to have a new head gasket . but u have to take off ur cam. its only a 3 cylinder and its all easy to get to its just annoying but ur gonna need to take out the valves to replace the seals and make sure there seated corectly ur prolly going to want to replace the exaust valves also as they burn up . most likely u should have no problem with ur intake valves other than normal buildup but they all should be cleaned once cleaned and u make sure there seating smoothly the valve stem seal is what slips on the end of each valve. im pretty tired at the moment and my literacey and spelling is horrid. if this helps it helps but pretty much ur gonna need to buy at least a head gasket and id bet ur exaust valves could use replaceing also. as that can cause alot of blow by ..."smoke from exaust" anyways good luck
To the best of my knowledge there is no adjustment for valves on the 3 cylinder
yes, if it's a 3 cylinder Mr Geo Metro yes, if it's a 3 cylinder Mr Geo Metro
No, 95 - 97 are self-adjusting, hydraulic lifters.
can someone tell me how to adjust timing on a geo metro 1996
You sell me the car, then you don't have to adjust it.
no adjustment possible
If the engines are the same size then yes (ie) 3 cylinder 1.0L to 3 cylinder 1.0L.
The Geo Metro was the only Geo to have a 3cylinder engine.
Yes 1litre 3 cylinder.
chevy
3.75 qts
non adjustable
Number one cylinder is the one closest to the passenger side fender.