Want this question answered?
there are 2 adjustment screws for the lancer 95 model...the first screw is located near the radiator(of course both sides) the other one is almost at the edge of the of your hood..if your going to adjust the height or the beam of your headlight you should adjust the screw near the hood(but you need patience in adjusting your headlight) if you want your beam higher you should turn the screw to the right but if you want it lower just turn in to the left...like what i said you need a lot of patience in adjusting the headlights...the other screw is for adjusting the width of your beam...
how to adjust headlite on 1995 nissian pickup
Dont go to this
Many similar items can be found on eBay
timing degress for a 1.5 lancer
To adjust headlights, open hood and look at top outside edges of headlight assemblies. You will see an access hole in each assembly to insert a flat-blade screwdriver. Insert screwdriver until it engages adjusting-gear teeth, then turn screwdriver to turn gear and adjust headlight up or down, depending on which way you turn screwdriver. Turn on headlights and aim car at wall to see which way headlight beam moves when you turn screwdriver.
The headlights do not have a fuse, they have a circuit breaker that is built into the headlight switch.
== ==
how do we adjust hand brakes
Open the hood, and look between at the edge of the plastic piece that is the top of the grill, there above each headlight you will see two small stems, they are essentially custom bolts for adjusting the headlights.
4-3-1-2
Start with checking the bulbs.