The absolute best thing for you to do is to obtain a Hayne's 1990-1994 Pontiac transport repair book. If you can't find one at your local parts store then try the library. It contains step by step text and pics showing what you need to do.If you are NOT mechanically inclined, I would pay a shop to do it. Don't take unnecessary chances with your safety just to save a few bucks. As a matter of practice, do ONE wheel at a time. that way, you have an assembled wheel to look at when it comes time to reassemble the parts.
What about 1993 Pontiac drum brakes, please be specific.
The 1993 Trans Sport is a type of Pontiac mini van. The transport weighs anywhere from 3,600 to 3,900 pounds.
No, only the nob on the outside.
The 1993 Pontiac Transport windshield wiper control module is located on the firewall in the engine compartment. The windshield wiper control module will be on the passenger side of the firewall.
Are the brakes right and is the e-brake not sticking?
Hi,I asked the same question for my 3.8 liters Pontiac Transport 1994, and was told at the concessionnary garage that there is no PCV valve to replace on my engine....that answer from the garage manager and parts dept. people.Pacman
my owners manual for my 1993 says that it has a 20 gallon tank.
In the 1993 Pontiac Transport Van, the two heater cores are interchangeable. To install one heater core in another position, longer hoses might be necessary to reach the necessary hose positions and new holes might need to be drilled.
Located in the empty cavity just in front of the fuel tank, next to the "rame"rail.
There are many springs that have to go a certain way. It is best if you get a shop manual from the parts store for your car.
how do i replace a water hose in 1993 pontiac grand am
A 1993 Pontiac Grand Am weighs approximately 2,828 lbs. The Pontiac Grand Am stopped production in the year 2005. The car was replaced with the Pontiac G6.