0
What else can I help you with?
How do you change the PCV valve in a 98 Pontiac transport?
To change the PCV valve in a 1998 Pontiac Transport, first locate the valve, which is typically found on the valve cover or connected to the intake manifold. Disconnect the hose attached to the old PCV valve, then twist and pull the valve out of its socket. Replace it with a new PCV valve, making sure it fits securely, and reconnect the hose. Finally, start the engine to ensure proper installation and check for any leaks.
Where is the PCV valve located on a 1998 Pontiac Grand AM?
on a 1998 Pontiac gan am ,they do not have a pcv valve.
Where is the pcv valve on the 1999 Pontiac grand prix gtp?
There is a great write-up with pics on how to change the PCV valve at: http://macgp.clubgp.com/howto/pcv/pcv.html Hope this helps. G
Where is the pcv valve located on a 1995 Pontiac Transport 3800 engine?
Sorry I am not sure how to describe this, but this is a diagram of a Bonneville and its in the exact same location,
Where is the PCV Valve on a 98 Pontiac Transport 3400 located?
located about 12 inches right of oil fill cap.attached to front valve cover.
Where is the PCV valve on a 2002 Pontiac Bonneville?
The PCV valve on a 2002 Pontiac Bonneville is located on the back of the in take manifold, however to get to the PCV valve you will need to remove the valve cover.
How can you stop fast idling on my 1993 Pontiac GrandPrix 3.1L engine?
Try changing the pcv valve. Also check for blockage on the tube going to it.
How do you replace PCV valve on Pontiac g6?
The PCV is non-serviceable. It cannot be replaced.
Where is the PCV valve located in a 1993 Mercury Sable?
The PCV valve is located on the back side valve cover. It should be a plug in type and easy to change.
How does the Pcv valve go in a 92 Pontiac Sunbird. I just bought it used and it didn't have one in it and I need to replace it?
Pontiac don't carry pcv valves
Where is the PCV valve located on a 1991 Pontiac Grand Am?
=== === === ===
How do you change a PCV valve on 1993 gm truck?
Pull straight up on the PCV valve to remove it from the valve cover, then pull off the hose from the PCV valve, install the new one by doing the opposite of removal.
